1.6 KiB
1.6 KiB
chuniio-tasoller with air tower LEDs
chuniio driver for tasoller custom 2.0 firmware now with working air tower LEDs when using Dniel97 segatools
thanks to:
- akiroz for the original code and USB Protocol information
- Dniel97 for rewritting my failed attempts at making this work
Supported titles:
- CHUNITHM
- CHUNITHM NEW
- CHUNITHM NEW PLUS
- CHUNITHM SUN
- CHUNITHM SUN PLUS
- CHUNITHM LUMINOUS
Configuration
- For modern CHUNITHM (NEW and above)
segatools.ini
[chuniio]
path32=chuniio_tasoller.dll
path64=chuniio_tasoller_x64.dll
- For older CHUNITHM (PARADISE LOST and older)
segatools.ini
[chuniio]
path=chuniio_tasoller.dll
chusan=0
USB Protocol
Custom firmware USB device: 1CCF:2333
- Interface 1
- Endpoint 4 IN Interrupt (0x84)
- data len: 36 bytes
- data[0-2]: {0x68, 0x66, 0x84} (magic?)
- data[3]
- bit 0-5: beam 1-6 (1 = blocked)
- bit 6-7: fn1 & fn2 (1 = pressed)
- data[4-35]: touch sensor 1-32 pressure
- Endpoint 3 OUT Bulk (0x03)
- data len: 240 bytes
- data[0-2]: {0x42, 0x4C, 0x00} (magic?)
- data[3-95]: Slider LED (GRB order, right->left)
- data[96-167]: Left LED (GRB order top->bottom)
- data[168-239]: Right LED (GRB order bottom->top)
- Endpoint 4 IN Interrupt (0x84)
Build
$ git clone ...
$ git submodule update --init
$ zig build -Doptimize=ReleaseSafe
$ ls zig-out/lib/chuniio_tasoller.dll