1.3 KiB
Chunithm configuration settings
This file describes configuration settings specific to Chunithm.
Keyboard binding settings use Virtual-Key Codes.
[chuniio]
Controls the input driver.
path
Specify a path for a third-party Chunithm input driver DLL. Default is empty (use built-in keyboard IO emulation).
In previous versions of Segatools this was accomplished by replacing the CHUNIIO.DLL file that came with Segatools. Segatools no longer ships with a separate CHUNIIO.DLL file (its functionality is now built into CHUNIHOOK.DLL).
[io3]
Cabinet specific inputs.
test
Default 0x31 (1 Key)
Key-binding for cabinet test button.
service
Default 0x32 (2 Key)
Key-binding for cabinet service button.
coin
Default 0x33 (3 Key)
Key-binding for cabinet coin switch.
[slider]
Key bindings for each of the 32 touch cells.
cellX
Defaults to key mappings in left-to-right-order as follows:
SSSSDDDDFFFFGGGGHHHHJJJJKKKKLLLL
Key binding for a single touch cell. Replace the X with a value from 1 to 32 to bind keys to
each cell, e.g. cell32=0x53, cell1=0x53 etc.
Touch cells are numbered FROM RIGHT TO LEFT! starting from 1. This is in order to match the numbering used in the operator menu and service manual.