updated README and added "AM Daemon" window name

Reviewed-on: Dniel97/segatools#4

Package.mk

@@ -111,6 +111,7 @@ $(BUILD_DIR_ZIP)/swdc.zip:
 	$(V)cp $(BUILD_DIR_64)/subprojects/capnhook/inject/inject.exe \
 		$(BUILD_DIR_64)/swdchook/swdchook.dll \
 		$(DIST_DIR)/swdc/segatools.ini \
+		$(DIST_DIR)/swdc/config_hook.json \
 		$(DIST_DIR)/swdc/start.bat \
     	$(BUILD_DIR_ZIP)/swdc
 	$(V)cp pki/billing.pub \
@@ -224,6 +225,7 @@ $(BUILD_DIR_ZIP)/segatools.zip: \
 		$(BUILD_DIR_ZIP)/mu3.zip \
 		$(BUILD_DIR_ZIP)/mai2.zip \
 		$(BUILD_DIR_ZIP)/cm.zip \
+		$(BUILD_DIR_ZIP)/fgo.zip \
 		CHANGELOG.md \
 		README.md \
 

README.md

@@ -1,33 +1,31 @@
 # Segatools
 
-Version: `2023-11-22`
+Version: `2024-02-22`
 
 Loaders and hardware emulators for SEGA games that run on the Nu and ALLS platforms.
 
 ## List of supported games
 
-* Chunithm
+* CHUNITHM
-  * [Chunithm (Plus)](doc/chunihook.md)
+  * up to [CHUNITHM PARADISE LOST](doc/chunihook.md)
-  * [Chunithm Air (Plus)](doc/chunihook.md)
+  * starting from CHUNITHM NEW!! 
-  * [Chunithm Star (Plus)](doc/chunihook.md)
-  * [Chunithm Amazon (Plus)](doc/chunihook.md)
-  * [Chunithm Crystal (Plus)](doc/chunihook.md)
-  * Chunithm SUN
 * Initial D
   * [Initial D Arcade Stage Zero](doc/idzhook.md)
   * Initial D THE ARCADE
+* Hatsune Miku: Project DIVA Arcade
+  * up to Future Tone
 * SEGA World Drivers Championship
-  * up to SEGA World Drivers Championship 2019
+  * SEGA World Drivers Championship 2019
 * Fate/Grand Order
   * Fate/Grand Order Arcade
-* ONGEKI
+* O.N.G.E.K.I.
-  * up to bright MEMORY
+  * starting from O.N.G.E.K.I.
 * maimai DX
-  * up to maimai DX FESTiVAL PLUS
+  * starting from maimai DX
 * Card Maker
-  * up to Card Maker 1.35
+  * starting from Card Maker
-* Wacca
+* WACCA
-  * up to WACCA Reverse
+  * starting from WACCA
 
 ## End-users
 

aimeio/aimeio.c

@@ -68,7 +68,7 @@ static void aime_io_config_read(
             cfg->felica_path,
             _countof(cfg->felica_path),
             filename);
-    dprintf("NFC: felicaPath GetLastError %lx\n", GetLastError());
+    // dprintf("NFC: felicaPath GetLastError %lx\n", GetLastError());
 
     cfg->felica_gen = GetPrivateProfileIntW(
             L"aime",

board/config.c

@@ -8,6 +8,7 @@
 #include "board/aime-dll.h"
 #include "board/config.h"
 #include "board/sg-reader.h"
+#include "board/vfd.h"
 
 #include "util/dprintf.h"
 
@@ -71,7 +72,7 @@ void aime_config_load(struct aime_config *cfg, const wchar_t *filename)
 
     aime_dll_config_load(&cfg->dll, filename);
     cfg->enable = GetPrivateProfileIntW(L"aime", L"enable", 1, filename);
-    cfg->high_baudrate = GetPrivateProfileIntW(L"aime", L"highbaud", 1, filename);
+    cfg->high_baudrate = GetPrivateProfileIntW(L"aime", L"highBaud", 1, filename);
     cfg->gen = GetPrivateProfileIntW(L"aime", L"gen", 0, filename);
 }
 
@@ -82,3 +83,11 @@ void io4_config_load(struct io4_config *cfg, const wchar_t *filename)
 
     cfg->enable = GetPrivateProfileIntW(L"io4", L"enable", 1, filename);
 }
+
+void vfd_config_load(struct vfd_config *cfg, const wchar_t *filename)
+{
+    assert(cfg != NULL);
+    assert(filename != NULL);
+
+    cfg->enable = GetPrivateProfileIntW(L"vfd", L"enable", 1, filename);
+}

board/config.h

@@ -5,6 +5,8 @@
 
 #include "board/io4.h"
 #include "board/sg-reader.h"
+#include "board/vfd.h"
 
 void aime_config_load(struct aime_config *cfg, const wchar_t *filename);
 void io4_config_load(struct io4_config *cfg, const wchar_t *filename);
+void vfd_config_load(struct vfd_config *cfg, const wchar_t *filename);

board/vfd.c

@@ -27,14 +27,22 @@ static struct uart vfd_uart;
 static uint8_t vfd_written[512];
 static uint8_t vfd_readable[512];
 
-HRESULT vfd_hook_init(unsigned int port_no)
+HRESULT vfd_hook_init(const struct vfd_config *cfg, unsigned int port_no)
 {
+    assert(cfg != NULL);
+
+    if (!cfg->enable) {
+        return S_FALSE;
+    }
+
     uart_init(&vfd_uart, port_no);
     vfd_uart.written.bytes = vfd_written;
     vfd_uart.written.nbytes = sizeof(vfd_written);
     vfd_uart.readable.bytes = vfd_readable;
     vfd_uart.readable.nbytes = sizeof(vfd_readable);
 
+    dprintf("VFD: hook enabled.\n");
+
     return iohook_push_handler(vfd_handle_irp);
 }
 

board/vfd.h

@@ -2,4 +2,9 @@
 
 #include <windows.h>
 
-HRESULT vfd_hook_init(unsigned int port_no);
+struct vfd_config {
+    bool enable;
+};
+
+
+HRESULT vfd_hook_init(const struct vfd_config *cfg, unsigned int port_no);

carolio/config.c

@@ -14,7 +14,7 @@ void carol_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", VK_F3, filename);
 }

chunihook/chuni-dll.c

@@ -39,6 +39,19 @@ const struct dll_bind_sym chuni_dll_syms[] = {
     }
 };
 
+/* Helper function to determine upon dll_bind failure whether the required functions were found
+   NOTE: relies on symbols order declared above */
+static HRESULT has_enough_symbols(uint16_t version, uint8_t count)
+{
+    if ( version <= 0x0101 && count == 7 )
+        return S_OK;
+
+    if ( version >= 0x0102 && count == 9 )
+        return S_OK;
+
+    return E_FAIL;
+}
+
 struct chuni_dll chuni_dll;
 
 // Copypasta DLL binding and diagnostic message boilerplate.
@@ -98,16 +111,24 @@ HRESULT chuni_dll_init(const struct chuni_dll_config *cfg, HINSTANCE self)
     }
 
     sym = chuni_dll_syms;
+    const struct dll_bind_sym *init_sym = &sym[0];
     hr = dll_bind(&chuni_dll, src, &sym, _countof(chuni_dll_syms));
 
     if (FAILED(hr)) {
         if (src != self) {
-            dprintf("Chunithm IO: Custom IO DLL does not provide function "
+            // Might still be ok depending on external dll API version
-                    "\"%s\". Please contact your IO DLL's developer for "
+            int bind_count = sym - init_sym;
-                    "further assistance.\n",
+            if ( has_enough_symbols(chuni_dll.api_version, bind_count) == S_OK )
-                    sym->sym);
+            {
+                hr = S_OK;
+            } else {
+                dprintf("Chunithm IO: Custom IO DLL does not provide function "
+                        "\"%s\". Please contact your IO DLL's developer for "
+                        "further assistance.\n",
+                        sym->sym);
 
-            goto end;
+                goto end;
+            }
         } else {
             dprintf("Internal error: could not reflect \"%s\"\n", sym->sym);
         }

chunihook/config.c

@@ -56,7 +56,7 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
     cfg->port_no = 0;
-    cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaudrate", 0, filename);
+    cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0x90, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xadf7, filename);
 

chuniio/config.c

@@ -34,9 +34,9 @@ void chuni_io_config_load(
     assert(filename != NULL);
 
     // Technically it's io4 but leave this for compatibility with old configs.
-    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", VK_F3, filename);
     cfg->vk_ir_emu = GetPrivateProfileIntW(L"io3", L"ir", VK_SPACE, filename);
 
     for (i = 0 ; i < 6 ; i++) {

chusanhook/config.c

@@ -96,7 +96,7 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
     cfg->port_no = 0;
-    cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaudrate", 0, filename);
+    cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0x90, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xadf7, filename);
 
@@ -160,6 +160,7 @@ void chusan_hook_config_load(
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
     gfx_config_load(&cfg->gfx, filename);
+    vfd_config_load(&cfg->vfd, filename);
     chuni_dll_config_load(&cfg->dll, filename);
     slider_config_load(&cfg->slider, filename);
     led15093_config_load(&cfg->led15093, filename);

chusanhook/config.h

@@ -20,6 +20,7 @@ struct chusan_hook_config {
     struct dvd_config dvd;
     struct io4_config io4;
     struct gfx_config gfx;
+    struct vfd_config vfd;
     struct chuni_dll_config dll;
     struct slider_config slider;
     struct led15093_config led15093;

chusanhook/dllmain.c

@@ -122,7 +122,7 @@ static DWORD CALLBACK chusan_pre_startup(void)
     unsigned int first_port = is_cvt ? 2 : 20;
 
     if (!is_cvt) {
-        hr = vfd_hook_init(2);
+        hr = vfd_hook_init(&chusan_hook_cfg.vfd, 2);
 
         if (FAILED(hr)) {
             goto fail;

cmhook/config.c

@@ -37,6 +37,7 @@ void cm_hook_config_load(
     aime_config_load(&cfg->aime, filename);
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
+    vfd_config_load(&cfg->vfd, filename);
     touch_screen_config_load(&cfg->touch, filename);
     cm_dll_config_load(&cfg->dll, filename);
 }

cmhook/config.h

@@ -16,6 +16,7 @@ struct cm_hook_config {
     struct aime_config aime;
     struct dvd_config dvd;
     struct io4_config io4;
+    struct vfd_config vfd;
     struct cm_dll_config dll;
     struct touch_screen_config touch;
 };

cmhook/dllmain.c

@@ -60,7 +60,7 @@ static DWORD CALLBACK cm_pre_startup(void)
         goto fail;
     }
 
-    hr = vfd_hook_init(2);
+    hr = vfd_hook_init(&cm_hook_cfg.vfd, 2);
 
     if (FAILED(hr)) {
         goto fail;

cmio/config.c

@@ -16,7 +16,7 @@ void cm_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
 }

dist/carol/segatools.ini

@@ -1,23 +1,56 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
-; Insert the path to the game Option directory here (contains Axxx directories)
+; Insert the path to the game Option directory here (contains MOV1, PAR0,
+; PAR1, RES0 and RES1 directories)
 option=
 ; Create an empty directory somewhere and insert the path here.
 ; This directory may be shared between multiple SEGA games.
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
+[aime]
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
+enable=1
+aimePath=DEVICE\aime.txt
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
 default=127.0.0.1
 
 [netenv]
-; Simulate an ideal LAN environment.
+; Simulate an ideal LAN environment. This may interfere with head-to-head play.
+; Chunithm is extremely picky about its LAN environment, so leaving this
+; setting enabled is strongly recommended.
 enable=1
+; The final octet of the local host's IP address on the virtualized subnet (so,
+; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
+; local host's virtualized LAN IP is `192.168.32.11`).
+addrSuffix=11
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
 
 [gpio]
+; Emulated Nu DIP switch for Distribution Server setting.
+;
+; If multiple machines are present on the same LAN then set this to 1 on
+; exactly one machine and set this to 0 on all others.
 dipsw1=1
 
 [keychip]
@@ -26,6 +59,10 @@ dipsw1=1
 ; that subnet must start with 192.168.
 subnet=192.168.126.0
 
+; -----------------------------------------------------------------------------
+; Misc. hooks settings
+; -----------------------------------------------------------------------------
+
 [gfx]
 ; Force the game to run windowed.
 windowed=1
@@ -34,15 +71,31 @@ framed=1
 ; Select the monitor to run the game on. (Fullscreen only, 0 =primary screen)
 monitor=0
 
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
 [aimeio]
 ; To use a custom card reader IO DLL enter its path here.
 ; Leave empty if you want to use Segatools built-in keyboard input.
 path=
 
+; -----------------------------------------------------------------------------
+; Input settings
+; -----------------------------------------------------------------------------
+
+; Keyboard bindings are specified as hexadecimal (prefixed with 0x) or decimal
+; (not prefixed with 0x) virtual-key codes, a list of which can be found here:
+;
+; https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
+;
+; This is, admittedly, not the most user-friendly configuration method in the
+; world. An improved solution will be provided later.
+
 [io3]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72

dist/chuni/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,6 +12,20 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
+[aime]
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
+enable=1
+aimePath=DEVICE\aime.txt
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -18,6 +36,14 @@ default=127.0.0.1
 ; Chunithm is extremely picky about its LAN environment, so leaving this
 ; setting enabled is strongly recommended.
 enable=1
+; The final octet of the local host's IP address on the virtualized subnet (so,
+; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
+; local host's virtualized LAN IP is `192.168.32.11`).
+addrSuffix=11
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
 
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
@@ -25,6 +51,10 @@ enable=1
 ; that subnet must start with 192.168.
 subnet=192.168.139.0
 
+; -----------------------------------------------------------------------------
+; Misc. hooks settings
+; -----------------------------------------------------------------------------
+
 [gfx]
 ; Force the game to run windowed.
 windowed=1
@@ -33,6 +63,10 @@ framed=1
 ; Select the monitor to run the game on. (Fullscreen only, 0 =primary screen)
 monitor=0
 
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
 [aimeio]
 ; To use a custom card reader IO DLL enter its path here.
 ; Leave empty if you want to use Segatools built-in keyboard input.
@@ -43,6 +77,10 @@ path=
 ; Leave empty if you want to use Segatools built-in keyboard input.
 path=
 
+; -----------------------------------------------------------------------------
+; LED settings
+; -----------------------------------------------------------------------------
+
 [led15093]
 ; Enable emulation of the 15093-06 controlled lights, which handle the air tower 
 ; RGBs and the rear LED panel (billboard) on the cabinet.
@@ -97,12 +135,12 @@ controllerLedOutputSerial=0
 ; world. An improved solution will be provided later.
 
 [io3]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 ; Set to 0 for enable separate ir control. Deafult is space key.
 ir=0x20
 

dist/chusan/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,17 +12,26 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
-; Enable aime reader emulation.
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
 enable=1
 aimePath=DEVICE\aime.txt
 ; Enable high baud rate.
-;highbaud=1
+;highBaud=1
 
-[aimeio]
+[vfd]
-; Uncomment this if you have custom (x64) aime implementation.
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
-; Leave empty if you want to use Segatools built-in keyboard input.
+; GP1232A02A FUTABA assembly.
-;path=
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
 
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
@@ -30,6 +43,14 @@ default=127.0.0.1
 ; Chunithm is extremely picky about its LAN environment, so leaving this
 ; setting enabled is strongly recommended.
 enable=1
+; The final octet of the local host's IP address on the virtualized subnet (so,
+; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
+; local host's virtualized LAN IP is `192.168.32.11`).
+addrSuffix=11
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
 
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
@@ -55,6 +76,10 @@ dipsw2=1
 ; the LED 837-15093-06 COM port and the AiMe reder hardware generation as well.
 dipsw3=1
 
+; -----------------------------------------------------------------------------
+; Misc. hooks settings
+; -----------------------------------------------------------------------------
+
 [gfx]
 ; Force the game to run windowed.
 windowed=1
@@ -63,6 +88,15 @@ framed=0
 ; Select the monitor to run the game on. (Fullscreen only, 0 =primary screen)
 monitor=0
 
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL (x64) enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
 [chuniio]
 ; Uncomment this if you have custom chuniio implementation comprised of a single 32bit DLL.
 ; (will use chu2to3 engine internally)
@@ -73,6 +107,10 @@ monitor=0
 ;path32=
 ;path64=
 
+; -----------------------------------------------------------------------------
+; LED settings
+; -----------------------------------------------------------------------------
+
 [led15093]
 ; Enable emulation of the 15093-06 controlled lights, which handle the air tower 
 ; RGBs and the rear LED panel (billboard) on the cabinet.
@@ -127,12 +165,12 @@ controllerLedOutputSerial=0
 ; world. An improved solution will be provided later.
 
 [io3]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 ; Set to 0 for enable separate ir control. Deafult is space key.
 ir=0x20
 

dist/chusan/start.bat

@@ -2,8 +2,9 @@
 
 pushd %~dp0
 
-start /min inject_x64 -d -k chusanhook_x64.dll amdaemon.exe -c config_common.json config_server.json config_client.json config_cvt.json config_sp.json config_hook.json
+start "AM Daemon" /min inject_x64 -d -k chusanhook_x64.dll amdaemon.exe -c config_common.json config_server.json config_client.json config_cvt.json config_sp.json config_hook.json
 inject_x86 -d -k chusanhook_x86.dll chusanApp.exe
+
 taskkill /f /im amdaemon.exe > nul 2>&1
 
 echo.

dist/cm/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,11 +12,25 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
-; Enable aime reader emulation.
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
 enable=1
 aimePath=DEVICE\aime.txt
 
+[vfd]
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+; GP1232A02A FUTABA assembly.
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -24,6 +42,10 @@ default=127.0.0.1
 ; setting enabled is recommended.
 enable=1
 
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
@@ -38,10 +60,23 @@ enable=1
 ; this to 0 on exactly one machine and set this to 1 on all others.
 dipsw1=0
 
+; -----------------------------------------------------------------------------
+; Misc. hooks settings
+; -----------------------------------------------------------------------------
+
 [touch]
 ; Enable/Disable WinTouch emulation
 enable=0
 
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
 ; -----------------------------------------------------------------------------
 ; Input settings
 ; -----------------------------------------------------------------------------
@@ -55,9 +90,9 @@ enable=0
 ; world. An improved solution will be provided later.
 
 [io4]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72

dist/cm/start.bat

@@ -2,7 +2,7 @@
 
 pushd %~dp0
 
-start /min inject -d -k cmhook.dll amdaemon.exe -c config_common.json config_server.json config_client.json config_hook.json
+start "AM Daemon" /min inject -d -k cmhook.dll amdaemon.exe -c config_common.json config_server.json config_client.json config_hook.json
 inject -d -k cmhook.dll CardMaker.exe -screen-fullscreen 0 -popupwindow -screen-width 1080 -screen-height 1920
 
 taskkill /f /im amdaemon.exe > nul 2>&1

dist/cxb/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Make sure theses are full paths and not relative or you will have a bad time
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
@@ -9,6 +13,27 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
+[aime]
+; Aime reader emulation
+; CXB is stupid, so we have to make the paths go back one
+enable=1
+aimePath=../DEVICE/aime.txt
+felicaPath=../DEVICE/felica.txt
+
+[led]
+; Emulation for the LED board. Currently it's just dummy responses,
+; but if somebody wants to make their keyboard or whatever light
+; up with the game they can
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -20,30 +45,19 @@ default=127.0.0.1
 ; setting enabled is strongly recommended.
 enable=1
 
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
 ; that subnet must start with 192.168.
-subnet=192.168.100.0
+subnet=192.168.150.0
 billingCa=../DEVICE/ca.crt
 billingPub=../DEVICE/billing.pub
 billingType=2
 
-[gfx]
-; Force the game to run windowed.
-windowed=1
-; Add a frame to the game window if running windowed.
-framed=1
-; Select the monitor to run the game on. (Fullscreen only, 0 =primary screen)
-monitor=0
-
-[aime]
-; Aime reader emulation
-; CXB is stupid, so we have to make the paths go back one
-enable=1
-aimePath=../DEVICE/aime.txt
-felicaPath=../DEVICE/felica.txt
-
 [eeprom]
 ; See above
 path=../DEVICE/eeprom.bin
@@ -52,21 +66,53 @@ path=../DEVICE/eeprom.bin
 ; See above
 path=../DEVICE/sram.bin
 
-[led]
+; -----------------------------------------------------------------------------
-; Emulation for the LED board. Currently it's just dummy responses,
+; Misc. hooks settings
-; but if somebody wants to make their keyboard or whatever light
+; -----------------------------------------------------------------------------
-; up with the game they can
+
-enable=1
+[gfx]
+; Force the game to run windowed.
+windowed=1
+; Add a frame to the game window if running windowed.
+framed=1
+; Select the monitor to run the game on. (Fullscreen only, 0 =primary screen)
+monitor=0
+
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+[cxbio]
+; To use a custom crossbeats REV. DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+; -----------------------------------------------------------------------------
+; Input settings
+; -----------------------------------------------------------------------------
+
+; Keyboard bindings are specified as hexadecimal (prefixed with 0x) or decimal
+; (not prefixed with 0x) virtual-key codes, a list of which can be found here:
+;
+; https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
+;
+; This is, admittedly, not the most user-friendly configuration method in the
+; world. An improved solution will be provided later.
 
 [revio]
 ; Enable emulation of the rev IO board
 enabe=1
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 ; Menu up key. Default is up arrow.
 up=0x26
 ; Menu down key. Default is down arrow.

dist/diva/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,6 +12,20 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
+[aime]
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
+enable=1
+aimePath=DEVICE\aime.txt
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -19,14 +37,56 @@ default=127.0.0.1
 ; setting enabled is strongly recommended.
 enable=1
 
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
 [gpio]
+; Emulated Nu DIP switch for Distribution Server setting.
+;
+; If multiple machines are present on the same LAN then set this to 1 on
+; exactly one machine and set this to 0 on all others.
 dipsw1=1
 
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
 ; that subnet must start with 192.168.
-subnet=192.168.150.0
+subnet=192.168.78.0
+
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+[divaio]
+; To use a custom Project DIVA Arcade IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in gamepad/wheel input.
+path=
+
+; -----------------------------------------------------------------------------
+; Input settings
+; -----------------------------------------------------------------------------
+
+; Keyboard bindings are specified as hexadecimal (prefixed with 0x) or decimal
+; (not prefixed with 0x) virtual-key codes, a list of which can be found here:
+;
+; https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
+;
+; This is, admittedly, not the most user-friendly configuration method in the
+; world. An improved solution will be provided later.
+
+[io3]
+; Test button virtual-key code. Default is the F1 key.
+test=0x70
+; Service button virtual-key code. Default is the F2 key.
+service=0x71
+; Keyboard button to increment coin counter. Default is the F3 key.
+coin=0x72
 
 [slider]
 cell1=0x51

dist/fgo/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,11 +12,41 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
-; Controls emulation of the Aime card reader assembly.
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
 enable=1
 aimePath=DEVICE\aime.txt
 
+[vfd]
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+; GP1232A02A FUTABA assembly.
+enable=1
+
+[deckReader]
+; 837-15345 RFID deck reader emulation setting.
+enable=1
+
+[ftdi]
+; FTDI serial to usb adapter emulation for CABINET LED.
+enable=1
+; COM port number where the LED board is connected to.
+portNo=17
+
+[led15093]
+; 837-15093-06 LED board emulation setting.
+enable=1
+; COM port number for the LED board. Has to be the same as the FTDI port.
+portNo=17
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -23,17 +57,33 @@ default=127.0.0.1
 ; SEGA games are somewhat picky about their LAN environment, so leaving this
 ; setting enabled is recommended.
 enable=1
-
 ; The final octet of the local host's IP address on the virtualized subnet (so,
 ; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
 ; local host's virtualized LAN IP is `192.168.32.11`).
 addrSuffix=11
 
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
 ; that subnet must start with 192.168.
-subnet=192.168.172.0
+subnet=192.168.167.0
+
+[gpio]
+; ALLS DIP switches.
+enable=1
+
+; Enable freeplay mode. This will disable the coin slot and set the game to
+; freeplay. Keep in mind that some game modes (e.g. Freedom/Time Modes) will not
+; allow you to start a game in freeplay mode.
+freeplay=0
+
+; -----------------------------------------------------------------------------
+; Misc. hook settings
+; -----------------------------------------------------------------------------
 
 [touch]
 ; WinTouch emulation setting.
@@ -51,21 +101,19 @@ printerOutPath="DEVICE\print"
 ; Rotate all printed images by 180 degrees.
 rotate180=1
 
-[deckReader]
+; -----------------------------------------------------------------------------
-; 837-15345 RFID deck reader emulation setting.
+; Custom IO settings
-enable=1
+; -----------------------------------------------------------------------------
 
-[ftdi]
+[aimeio]
-; FTDI serial to usb adapter emulation for CABINET LED.
+; To use a custom card reader IO DLL enter its path here.
-enable=1
+; Leave empty if you want to use Segatools built-in keyboard input.
-; COM port number where the LED board is connected to.
+path=
-portNo=17
 
-[led15093]
+[fgoio]
-; 837-15093-06 LED board emulation setting.
+; To use a custom Fate/Grand Order Arcade IO DLL enter its path here.
-enable=1
+; Leave empty if you want to use Segatools built-in gamepad input.
-; COM port number for the LED board. Has to be the same as the FTDI port.
+path=
-portNo=17
 
 ; -----------------------------------------------------------------------------
 ; Input settings
@@ -87,3 +135,27 @@ test=0x31
 service=0x32
 ; Keyboard button to increment coin counter. Default is the 3 key.
 coin=0x33
+
+;   .·:'''''''''''''''''''''''''''''''''''''''''''''':·.
+;   : :  ______                            / \   []  : :
+;   : : |      |   _____                   \ /  Coin : :
+;   : : |______|  { (0) }      /--\      Attack.     : :
+;   : :   DECK     \   /      /    \                 : :
+;   : :             | |       >    <                 : :
+;   : :             | |       \    /          ___    : :
+;   : :             | |        \--/          |   |   : :
+;   : :             JOY       Noble.         |   |   : :
+;   : :                                      |___|   : :
+;   : :                                      AIME.   : :
+;   '·:..............................................:·'
+;
+; Only XInput is currently supported.
+
+; Controller            Button
+; -------------------------------------------------------
+; Left Stick           Joystick
+; Left Stick Click     Reset Camera
+; Left Trigger         Dash
+; Left Shoulder        Switch Target
+; A/B                  Attack
+; X/Y                  Noble Phantasm

dist/idac/segatools.ini

@@ -1,18 +1,30 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
-; Insert the path to the game Option directory here (contains OPxx directories)
+; Insert the path to the game Option directory here (contains MVxx directories)
 option=
 ; Create an empty directory somewhere and insert the path here.
 ; This directory may be shared between multiple SEGA games.
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
 ; Controls emulation of the Aime card reader assembly.
 enable=1
 aimePath=DEVICE\aime.txt
 
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -24,6 +36,10 @@ default=127.0.0.1
 ; setting enabled is recommended.
 enable=1
 
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
@@ -59,13 +75,17 @@ dipsw3=0
 dipsw4=0
 dipsw5=0
 
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
 [aimeio]
 ; To use a custom card reader IO DLL enter its path here.
 ; Leave empty if you want to use Segatools built-in keyboard input.
 path=
 
 [idacio]
-; To use a custom Initial D The Arcade IO DLL enter its path here.
+; To use a custom Initial D THE ARCADE IO DLL enter its path here.
 ; Leave empty if you want to use Segatools built-in gamepad/wheel input.
 path=
 
@@ -82,12 +102,12 @@ path=
 ; world. An improved solution will be provided later.
 
 [io4]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 
 ; Input API selection for IO4 input emulator.
 ; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
@@ -106,6 +126,22 @@ mode=xinput
 restrict=128
 
 [xinput]
+; XInput bindings
+;
+; Left Stick           Steering
+; Right Stick          (Steering) when "singleStickSteering" is disabled
+; Left Trigger         Brake
+; Right Trigger        Accelerator
+; Left Stick Click     Left (used for Time Up)
+; Right Stick Click    Right (used for Time Up)
+; Left Shoulder        Shift Down
+; Right Shoulder       Shift Up
+; Start/A              Start
+; Back/B               View Change
+; X                    Shift Up
+; Y                    Shift Down
+; D-Pad                D-Pad
+
 ; Left and right thumbsticks are mapped to left and right dpad buttons.
 ; Press both thumbsticks to trigger "Time Up" and exit the course.
 ; Automatically reset the simulated shifter to Neutral when XInput Start is

dist/idac/start.bat

@@ -39,7 +39,7 @@ config_seat_single_ex.json ^
 config_seat_single_jp.json ^
 config_hook.json
 
-start /min inject -d -k idachook.dll amdaemon.exe -c %AMDAEMON_CFG%
+start "AM Daemon" /min inject -d -k idachook.dll amdaemon.exe -c %AMDAEMON_CFG%
 inject -d -k idachook.dll ..\WindowsNoEditor\GameProject.exe -culture=en launch=Cabinet ABSLOG="..\..\..\..\..\Userdata\GameProject.log" -Master -UserDir="..\..\..\Userdata" -NotInstalled -UNATTENDED
 taskkill /f /im amdaemon.exe > nul 2>&1
 

dist/idz/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,6 +12,10 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
 ; Controls emulation of the Aime card reader assembly.
 enable=1
@@ -16,11 +24,36 @@ aimePath=DEVICE\aime.txt
 felicaGen=0
 aimeGen=1
 
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
 default=127.0.0.1
 
+[netenv]
+; Simulate an ideal LAN environment. This may interfere with head-to-head play.
+; SEGA games are somewhat picky about their LAN environment, so leaving this
+; setting enabled is recommended.
+enable=1
+; The final octet of the local host's IP address on the virtualized subnet 
+; (so, if the keychip subnet is 192.168.32.0 and this value is set to 11, 
+; then the local host's virtualized LAN IP is 192.168.32.11).
+; Needed for in store battle, one needs to set it to 12.
+;addrSuffix=12
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
+[keychip]
+; The /24 LAN subnet that the emulated keychip will tell the game to expect.
+; If you disable netenv then you must set this to your LAN's IP subnet, and
+; that subnet must start with 192.168.
+subnet=192.168.158.0
+
 [ds]
 ; Region code on the emulated AMEX board DS EEPROM.
 ; 1: Japan
@@ -29,23 +62,16 @@ default=127.0.0.1
 ; NOTE: Changing this setting causes a factory reset.
 region=4
 
-[netenv]
+[gpio]
-; Simulate an ideal LAN environment. This may interfere with head-to-head play.
+; Emulated Nu DIP switch for Distribution Server setting.
-; SEGA games are somewhat picky about their LAN environment, so leaving this
+;
-; setting enabled is recommended.
+; If multiple machines are present on the same LAN then set this to 1 on
-enable=1
+; exactly one machine and set this to 0 on all others.
+dipsw1=1
 
-; The final octet of the local host's IP address on the virtualized subnet 
+; -----------------------------------------------------------------------------
-; (so, if the keychip subnet is 192.168.32.0 and this value is set to 11, 
+; Misc. hooks settings
-; then the local host's virtualized LAN IP is 192.168.32.11).
+; -----------------------------------------------------------------------------
-; Needed for in store battle, one needs to set it to 12.
-;addrSuffix=12
-
-[keychip]
-; The /24 LAN subnet that the emulated keychip will tell the game to expect.
-; If you disable netenv then you must set this to your LAN's IP subnet, and
-; that subnet must start with 192.168.
-subnet=192.168.158.0
 
 [gfx]
 ; Enables the graphics hook. This is required for some Initial D Zero versions
@@ -58,12 +84,9 @@ framed=1
 ; Select the monitor to run the game on. (Fullscreen only, 0=primary screen)
 monitor=0
 
-[gpio]
+; -----------------------------------------------------------------------------
-; Emulated Nu DIP switch for Distribution Server setting.
+; Custom IO settings
-;
+; -----------------------------------------------------------------------------
-; If multiple machines are present on the same LAN then set this to 1 on
-; exactly one machine and set this to 0 on all others.
-dipsw1=1
 
 [aimeio]
 ; To use a custom card reader IO DLL enter its path here.
@@ -88,12 +111,12 @@ path=
 ; world. An improved solution will be provided later.
 
 [io3]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 
 ; Input API selection for JVS input emulator.
 ; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
@@ -112,6 +135,20 @@ mode=xinput
 restrict=97
 
 [xinput]
+; XInput bindings
+;
+; Left Stick           Steering
+; Right Stick          (Steering) when "singleStickSteering" is disabled
+; Left Trigger         Brake
+; Right Trigger        Accelerator
+; Left Shoulder        Shift Down
+; Right Shoulder       Shift Up
+; Start/A              Start
+; Back/B               View Change
+; X                    Shift Up
+; Y                    Shift Down
+; D-Pad                D-Pad
+
 ; Automatically reset the simulated shifter to Neutral when XInput Start is
 ; pressed (e.g. when navigating menus between races).
 autoNeutral=1

dist/mai2/segatools.ini

@@ -1,18 +1,36 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
-; Insert the path to the game Option directory here (contains Axxx, Bxxx directories)
+; Insert the path to the game Option directory here (contains Axxx directories)
 option=
 ; Create an empty directory somewhere and insert the path here.
 ; This directory may be shared between multiple SEGA games.
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
-; Enable aime reader emulation.
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
 enable=1
 aimePath=DEVICE\aime.txt
 
+[vfd]
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+; GP1232A02A FUTABA assembly.
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -23,12 +41,20 @@ default=127.0.0.1
 ; SEGA games are somewhat picky about its LAN environment, so leaving this
 ; setting enabled is recommended.
 enable=1
+; The final octet of the local host's IP address on the virtualized subnet (so,
+; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
+; local host's virtualized LAN IP is `192.168.32.11`).
+addrSuffix=11
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
 
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
 ; that subnet must start with 192.168.
-subnet=192.168.100.0
+subnet=192.168.172.0
 
 [gpio]
 ; ALLS DIP switches.
@@ -43,6 +69,20 @@ freeplay=0
 ; this to 1 on exactly one machine and set this to 0 on all others.
 dipsw1=1
 
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+[mai2io]
+; To use a custom maimai DX IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
 ; -----------------------------------------------------------------------------
 ; Input settings
 ; -----------------------------------------------------------------------------
@@ -56,12 +96,12 @@ dipsw1=1
 ; world. An improved solution will be provided later.
 
 [io4]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 
 ; Key bindings for buttons around screen. The default key map, depicted
 ; in clockwise order, is as follows:

dist/mai2/start.bat

@@ -2,7 +2,7 @@
 
 pushd %~dp0
 
-start /min inject -d -k mai2hook.dll amdaemon.exe -f -c config_common.json config_server.json config_client.json
+start "AM Daemon" /min inject -d -k mai2hook.dll amdaemon.exe -f -c config_common.json config_server.json config_client.json
 inject -d -k mai2hook.dll sinmai -screen-fullscreen 0
 taskkill /f /im amdaemon.exe > nul 2>&1
 

dist/mercury/segatools.ini

@@ -1,11 +1,35 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
-amfs=amfs
+amfs=
+; Insert the path to the game Option directory here (contains Axxx directories)
+option=
 ; Create an empty directory somewhere and insert the path here.
 ; This directory may be shared between multiple SEGA games.
 ; NOTE: This has nothing to do with Windows %APPDATA%.
-appdata=appdata
+appdata=
-option=option
+
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
+[aime]
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
+enable=1
+aimePath=DEVICE\aime.txt
+
+[vfd]
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+; GP1232A02A FUTABA assembly.
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
 
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
@@ -17,6 +41,14 @@ default=127.0.0.1
 ; SEGA games are somewhat picky about their LAN environment, so leaving this
 ; setting enabled is recommended.
 enable=1
+; The final octet of the local host's IP address on the virtualized subnet (so,
+; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
+; local host's virtualized LAN IP is `192.168.32.11`).
+addrSuffix=11
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
 
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
@@ -24,9 +56,6 @@ enable=1
 ; that subnet must start with 192.168.
 subnet=192.168.174.0
 
-[gfx]
-enable=1
-
 [gpio]
 ; ALLS DIP switches.
 enable=1
@@ -40,6 +69,35 @@ freeplay=0
 ; this to 1 on exactly one machine and set this to 0 on all others.
 dipsw1=1
 
+; -----------------------------------------------------------------------------
+; Misc. hook settings
+; -----------------------------------------------------------------------------
+
+[gfx]
+enable=1
+
+; Hooks related to the touch boards
+[touch]
+enable=1
+
+; Hooks related to the LED board (codenamed Elisabeth)
+[elisabeth]
+enable=1
+
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+[mercuryio]
+; To use a custom WACCA IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
 ; -----------------------------------------------------------------------------
 ; Input settings
 ; -----------------------------------------------------------------------------
@@ -53,26 +111,14 @@ dipsw1=1
 ; world. An improved solution will be provided later.
 
 [io4]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 
 ; Volume up virtual-key code. Default is the "UP" key.
 volup=0x26
 ; Volume down virtual-key code. Default is the "DOWN" key.
 voldown=0x28
-
-; Hooks related to the touch boards
-[touch]
-enable=1
-
-; Hooks related to the LED board (codenamed Elisabeth)
-[elisabeth]
-enable=1
-
-;[mercuryio]
-; Use mercuryio.dll
-;path=mercuryio.dll

dist/mercury/start.bat

@@ -4,10 +4,10 @@ pushd %~dp0
 taskkill /f /im amdaemon.exe > nul 2>&1
 
 REM USA
-REM start inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_usa.json
+start "AM Daemon" /min inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_usa.json
 
 REM JP
-start inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_jpn.json
+start "AM Daemon" /min inject -d -k mercuryhook.dll amdaemon.exe -f -c config.json config_lan_install_client.json config_lan_install_server.json config_video_clone.json config_video_dual.json config_video_clone_flip.json config_video_dual_flip.json config_region_exp.json config_region_chn.json config_region_jpn.json
 inject -d -k mercuryhook.dll ../WindowsNoEditor/Mercury/Binaries/Win64/Mercury-Win64-Shipping.exe
 
 taskkill /f /im amdaemon.exe > nul 2>&1

dist/mu3/segatools.ini

@@ -1,3 +1,7 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
@@ -8,11 +12,25 @@ option=
 ; NOTE: This has nothing to do with Windows %APPDATA%.
 appdata=
 
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
+
 [aime]
-; Controls emulation of the Aime card reader assembly.
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
 enable=1
 aimePath=DEVICE\aime.txt
 
+[vfd]
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+; GP1232A02A FUTABA assembly.
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -24,6 +42,10 @@ default=127.0.0.1
 ; setting enabled is recommended.
 enable=1
 
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
+
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; If you disable netenv then you must set this to your LAN's IP subnet, and
@@ -43,12 +65,26 @@ freeplay=0
 ; this to 1 on exactly one machine and set this to 0 on all others.
 dipsw1=1
 
+; -----------------------------------------------------------------------------
+; Misc. hook settings
+; -----------------------------------------------------------------------------
+
 [gfx]
 enable=1
 
-[led15093]
+; -----------------------------------------------------------------------------
-; 837-15093-06 LED board emulation setting.
+; Custom IO settings
-enable=1
+; -----------------------------------------------------------------------------
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+[fgoio]
+; To use a custom O.N.G.E.K.I. IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard/gamepad input.
+path=
 
 ; -----------------------------------------------------------------------------
 ; Input settings
@@ -63,28 +99,43 @@ enable=1
 ; world. An improved solution will be provided later.
 
 [io4]
-; Input API selection for JVS input emulator.
+; Test button virtual-key code. Default is the F1 key.
-; Test button virtual-key code. Default is the 1 key.
+test=0x70
-test=0x31
+; Service button virtual-key code. Default is the F2 key.
-; Service button virtual-key code. Default is the 2 key.
+service=0x71
-service=0x32
+; Keyboard button to increment coin counter. Default is the F3 key.
-; Keyboard button to increment coin counter. Default is the 3 key.
+coin=0x72
-coin=0x33
 
 ; Set "1" to enable mouse lever emulation, "0" to use XInput
 mouse=1
 
+; XInput input bindings
+;
+; Left Stick        Lever
+; Left Trigger      Lever (move to the left)
+; Right Trigger     Lever (move to the right)
+; Left              Left red button
+; Up                Left green button
+; Right             Left blue button
+; Left Shoulder     Left side button
+; Right Shoulder    Right side button
+; X                 Right red button
+; Y                 Right green button
+; A                 Right blue button
+; Back              Left menu button
+; Start             Right menu button
+
 ; Keyboard input bindings
 left1=0x41  ; A
-left2=0x53	; S
+left2=0x53  ; S
-left3=0x44	; D
+left3=0x44  ; D
 
-leftSide=0x01	; Mouse Left
+leftSide=0x01   ; Mouse Left
-rightSide=0x02	; Mouse Right
+rightSide=0x02  ; Mouse Right
 
 right1=0x4A ; J
 right1=0x4B ; K
-right3=0x4C	; L
+right3=0x4C ; L
 
-leftMenu=0x55	; U
+leftMenu=0x55   ; U
-rightMenu=0x4F	; O
+rightMenu=0x4F  ; O

dist/mu3/start.bat

@@ -2,7 +2,7 @@
 
 pushd %~dp0
 
-start /min inject -d -k mu3hook.dll amdaemon.exe -f -c config_common.json config_server.json config_client.json
+start "AM Daemon" /min inject -d -k mu3hook.dll amdaemon.exe -f -c config_common.json config_server.json config_client.json
 inject -d -k mu3hook.dll mu3 -screen-fullscreen 0 -popupwindow -screen-width 1080 -screen-height 1920
 taskkill /f /im amdaemon.exe > nul 2>&1
 

dist/swdc/config_hook.json

@@ -0,0 +1,6 @@
+{
+    "emoney" :
+    {
+        "enable"        : false
+    }
+}

dist/swdc/segatools.ini

@@ -1,18 +1,36 @@
+; -----------------------------------------------------------------------------
+; Path settings
+; -----------------------------------------------------------------------------
+
 [vfs]
 ; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
 amfs=
-; Insert the path to the game Option directory here (contains OPxx directories)
+; Insert the path to the game Option directory here (contains Axxx directories)
 option=
 ; Create an empty directory somewhere and insert the path here.
 ; This directory may be shared between multiple SEGA games.
 ; NOTE: This has nothing to do with Windows %APPDATA%.
-appdata=
+appdata=appdata
+
+; -----------------------------------------------------------------------------
+; Device settings
+; -----------------------------------------------------------------------------
 
 [aime]
-; Controls emulation of the Aime card reader assembly.
+; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
+; reader.
 enable=1
 aimePath=DEVICE\aime.txt
 
+[vfd]
+; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+; GP1232A02A FUTABA assembly.
+enable=1
+
+; -----------------------------------------------------------------------------
+; Network settings
+; -----------------------------------------------------------------------------
+
 [dns]
 ; Insert the hostname or IP address of the server you wish to use here.
 ; Note that 127.0.0.1, localhost etc are specifically rejected.
@@ -23,12 +41,33 @@ default=127.0.0.1
 ; SEGA games are somewhat picky about their LAN environment, so leaving this
 ; setting enabled is recommended.
 enable=1
+; The final octet of the local host's IP address on the virtualized subnet (so,
+; if the keychip subnet is `192.168.32.0` and this value is set to `11`, then the
+; local host's virtualized LAN IP is `192.168.32.11`).
+addrSuffix=11
+
+; -----------------------------------------------------------------------------
+; Board settings
+; -----------------------------------------------------------------------------
 
 [keychip]
 ; The /24 LAN subnet that the emulated keychip will tell the game to expect.
 ; You must set this to your LAN's IP subnet, and that subnet must start with 192.168, 
 ; in order to find the MAIN cabinet.
-subnet=192.168.100.0
+subnet=192.168.160.0
+
+[gpio]
+; ALLS DIP switches.
+enable=1
+
+; Enable freeplay mode. This will disable the coin slot and set the game to
+; freeplay. Keep in mind that some game modes (e.g. Freedom/Time Modes) will not
+; allow you to start a game in freeplay mode.
+freeplay=0´
+
+; -----------------------------------------------------------------------------
+; Custom IO settings
+; -----------------------------------------------------------------------------
 
 [aimeio]
 ; To use a custom card reader IO DLL enter its path here.
@@ -40,15 +79,6 @@ path=
 ; Leave empty if you want to use Segatools built-in gamepad/wheel input.
 path=
 
-[gpio]
-; ALLS DIP switches.
-enable=1
-
-; Enable freeplay mode. This will disable the coin slot and set the game to
-; freeplay. Keep in mind that some game modes (e.g. Freedom/Time Modes) will not
-; allow you to start a game in freeplay mode.
-freeplay=0
-
 ; -----------------------------------------------------------------------------
 ; Input settings
 ; -----------------------------------------------------------------------------
@@ -62,12 +92,12 @@ freeplay=0
 ; world. An improved solution will be provided later.
 
 [io4]
-; Test button virtual-key code. Default is the 1 key.
+; Test button virtual-key code. Default is the F1 key.
-test=0x31
+test=0x70
-; Service button virtual-key code. Default is the 2 key.
+; Service button virtual-key code. Default is the F2 key.
-service=0x32
+service=0x71
-; Keyboard button to increment coin counter. Default is the 3 key.
+; Keyboard button to increment coin counter. Default is the F3 key.
-coin=0x33
+coin=0x72
 
 ; Input API selection for IO4 input emulator.
 ; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
@@ -86,6 +116,22 @@ mode=xinput
 restrict=128
 
 [xinput]
+; XInput bindings
+;
+; Left Stick           Steering
+; Right Stick          (Steering) when "singleStickSteering" is disabled
+; Left Trigger         Brake
+; Right Trigger        Accelerator
+; Left Shoulder        Left Paddle
+; Right Shoulder       Right Paddle
+; Start                Start
+; Back                 View Change
+; A                    Green (Wheel)
+; B                    Red (Wheel)
+; X                    Blue (Wheel)
+; Y                    Yellow (Wheel)
+; D-Pad                D-Pad
+
 ; Use the left thumbstick for steering instead of both on XInput Controllers.
 ; Not recommended as it will not give you the precision needed for this game.
 singleStickSteering=1

dist/swdc/start.bat

@@ -2,12 +2,36 @@
 
 pushd %~dp0
 
-rem Matching Server
+REM Root directory
-start /min ..\..\..\Tools\tdrserver.exe
+set ROOT_DIR=WindowsNoEditor
-REM start /min inject -d -k swdchook.dll amdaemon.exe -c config.json config_LanClient.json config_MiniCabinet.json config_hook.json
+
-start /min inject -d -k swdchook.dll amdaemon.exe -c config.json config_LanServer.json config_MiniCabinet.json
+rem Matching Server paths
-REM Valid -launch parameters are "PC", "Cabinet" and "MiniCabinet
+set MATCHING_SERVER_FILE_NAME=tdrserver.exe
-inject -d -k swdchook.dll ..\Todoroki\Binaries\Win64\Todoroki-Win64-Shipping.exe -launch=MiniCabinet -ABSLOG="..\..\..\..\..\Userdata\Todoroki.log" -UserDir="..\..\..\Userdata" -NotInstalled -UNATTENDED
+set MATCHING_SERVER_PATH=..\Tools\%MATCHING_SERVER_FILE_NAME%
+
+rem AM Daemon paths
+set DAEMON_DIR=%ROOT_DIR%\AMDaemon
+set DAEMON_CONFIG_PATH=%DAEMON_DIR%\config.json
+rem Make sure to use appdata=appdata in segatools.ini
+set DAEMON_CHECK_LAN_SERVER_PATH=appdata\SDDS\LanServer.dat
+
+rem Check if LanServer.dat is present
+if exist "%DAEMON_CHECK_LAN_SERVER_PATH%" (
+  set DAEMON_LAN_CONFIG_PATH=%DAEMON_DIR%\config_LanServer.json
+
+  start "matching_server" /min %MATCHING_SERVER_PATH%
+) else (
+  set DAEMON_LAN_CONFIG_PATH=%DAEMON_DIR%\config_LanClient.json
+)
+
+start "AM Daemon" /min inject -d -k swdchook.dll "%DAEMON_DIR%\amdaemon.exe" -c %DAEMON_CONFIG_PATH% -c %DAEMON_LAN_CONFIG_PATH% config_hook.json
+
+REM Launch Todoroki
+set APP_EXE_DIR=WindowsNoEditor\Todoroki\Binaries\Win64
+set APP_EXE_PATH=%APP_EXE_DIR%\Todoroki-Win64-Shipping.exe
+
+REM Valid -launch parameters are "Cabinet" or "MiniCabinet"
+inject -d -k swdchook.dll "%APP_EXE_PATH%" -launch="MiniCabinet" -ABSLOG="..\Userdata\Todoroki.log" -UserDir="..\Userdata" -NotInstalled -UNATTENDED
 
 taskkill /f /im amdaemon.exe > nul 2>&1
 taskkill /f /im tdrserver.exe > nul 2>&1

divaio/config.c

@@ -27,9 +27,9 @@ void diva_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", VK_F3, filename);
 
     for (i = 0 ; i < _countof(cfg->vk_buttons) ; i++) {
         swprintf_s(key, _countof(key), L"key%i", i + 1);

doc/config/common.md

@@ -31,7 +31,7 @@ Default: `1`
 Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
 reader (COM port number varies by game).
 
-### `highbaud`
+### `highBaud`
 
 Default: `1`
 
@@ -84,6 +84,17 @@ emulates an IC card in its proximity. A variety of different IC cards can be
 emulated; the exact choice of card that is emulated depends on the presence or
 absence of the configured card ID files.
 
+## `[vfd]`
+
+Controls emulation of the VFD GP1232A02A FUTABA assembly.
+
+### `enable`
+
+Default: `1`
+
+Enable VFD emulation (currently just stubbed). Disable to use a real VFD
+GP1232A02A FUTABA assembly (COM port number varies by game).
+
 ## `[amvideo]`
 
 Controls the `amvideo.dll` stub built into Segatools. This is a DLL that is
@@ -396,8 +407,8 @@ is an issue. Billing types are:
 Default: `0x64`
 
 An 8-bit bitfield of unclear meaning. The least significant bit indicates a
-developer dongle, I think? Changing this doesn't seem to have any effect on
+developer dongle. Changing this doesn't seem to have any effect on
-anything other than Project DIVA.
+anything other than SEGA AM2 games.
 
 Other values observed in the wild:
 

fgohook/config.c

@@ -48,7 +48,7 @@ void led15093_config_load(struct led15093_config *cfg, const wchar_t *filename)
 
     cfg->enable = GetPrivateProfileIntW(L"led15093", L"enable", 1, filename);
     cfg->port_no = GetPrivateProfileIntW(L"led15093", L"portNo", 0, filename);
-    cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaudrate", 0, filename);
+    cfg->high_baudrate = GetPrivateProfileIntW(L"led15093", L"highBaud", 0, filename);
     cfg->fw_ver = GetPrivateProfileIntW(L"led15093", L"fwVer", 0xA0, filename);
     cfg->fw_sum = GetPrivateProfileIntW(L"led15093", L"fwSum", 0xAA53, filename);
 
@@ -116,6 +116,7 @@ void fgo_hook_config_load(
     aime_config_load(&cfg->aime, filename);
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
+    vfd_config_load(&cfg->vfd, filename);
     touch_screen_config_load(&cfg->touch, filename);
     printer_config_load(&cfg->printer, filename);
     fgo_deck_config_load(&cfg->deck, filename);

fgohook/config.h

@@ -20,6 +20,7 @@ struct fgo_hook_config {
     struct aime_config aime;
     struct dvd_config dvd;
     struct io4_config io4;
+    struct vfd_config vfd;
     struct touch_screen_config touch;
     struct printer_config printer;
     struct deck_config deck;

fgohook/dllmain.c

@@ -67,7 +67,7 @@ static DWORD CALLBACK fgo_pre_startup(void)
         goto fail;
     }
 
-    hr = vfd_hook_init(1);
+    hr = vfd_hook_init(&fgo_hook_cfg.vfd, 1);
 
     if (FAILED(hr)) {
         goto fail;

fgohook/fgo-dll.h

@@ -11,7 +11,7 @@ struct fgo_dll {
     void (*get_opbtns)(uint8_t *opbtn);
     void (*get_gamebtns)(uint8_t *gamebtn);
     void (*get_analogs)(int16_t *stick_x, int16_t *stick_y);
-    HRESULT (*led_init)();
+    HRESULT (*led_init)(void);
     void (*led_set_leds)(uint8_t board, uint8_t *rgb);
 };
 

fgoio/config.c

@@ -14,7 +14,7 @@ void fgo_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
 }

fgoio/fgoio.c

@@ -67,11 +67,11 @@ HRESULT fgo_io_poll(void)
         fgo_gamebtn |= FGO_IO_GAMEBTN_TARGET;
     }
 
-    if (xb & XINPUT_GAMEPAD_A) {
+    if (xb & XINPUT_GAMEPAD_A || xb & XINPUT_GAMEPAD_B) {
         fgo_gamebtn |= FGO_IO_GAMEBTN_ATTACK;
     }
 
-    if (xb & XINPUT_GAMEPAD_Y) {
+    if (xb & XINPUT_GAMEPAD_Y || xb & XINPUT_GAMEPAD_X) {
         fgo_gamebtn |= FGO_IO_GAMEBTN_NOBLE_PHANTASHM;
     }
     
@@ -142,7 +142,6 @@ void fgo_io_get_analogs(int16_t *stick_x, int16_t *stick_y)
 
 HRESULT fgo_io_led_init(void)
 {
-    // return 0;
     return S_OK;
 }
 

idachook/idac-dll.c

@@ -12,9 +12,6 @@ const struct dll_bind_sym idac_dll_syms[] = {
     {
         .sym = "idac_io_init",
         .off = offsetof(struct idac_dll, init),
-    }, {
-        .sym = "idac_io_poll",
-        .off = offsetof(struct idac_dll, poll),
     }, {
         .sym = "idac_io_get_opbtns",
         .off = offsetof(struct idac_dll, get_opbtns),

idachook/idac-dll.h

@@ -7,7 +7,6 @@
 struct idac_dll {
     uint16_t api_version;
     HRESULT (*init)(void);
-    HRESULT (*poll)(void);
     void (*get_opbtns)(uint8_t *opbtn);
     void (*get_gamebtns)(uint8_t *gamebtn);
     void (*get_shifter)(uint8_t *gear);

idachook/io4.c

@@ -57,7 +57,6 @@ static HRESULT idac_io4_poll(void *ctx, struct io4_state *state)
     struct idac_io_analog_state analog_state;
     HRESULT hr;
 
-    assert(idac_dll.poll != NULL);
     assert(idac_dll.get_opbtns != NULL);
     assert(idac_dll.get_gamebtns != NULL);
     assert(idac_dll.get_analogs != NULL);
@@ -65,13 +64,6 @@ static HRESULT idac_io4_poll(void *ctx, struct io4_state *state)
 
     memset(state, 0, sizeof(*state));
     memset(&analog_state, 0, sizeof(analog_state));
-
-    hr = idac_dll.poll();
-
-    if (FAILED(hr)) {
-        return hr;
-    }
-
     opbtn = 0;
     gamebtn = 0;
     gear = 0;

idacio/config.c

@@ -124,9 +124,9 @@ void idac_io_config_load(struct idac_io_config *cfg, const wchar_t *filename)
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
     cfg->restrict_ = GetPrivateProfileIntW(L"io4", L"restrict", 128, filename);
 
     GetPrivateProfileStringW(

idacio/idacio.def

@@ -2,7 +2,6 @@ LIBRARY idacio
 
 EXPORTS
     idac_io_init
-    idac_io_poll
     idac_io_get_opbtns
     idac_io_get_gamebtns
     idac_io_get_shifter

idacio/idacio.h

@@ -56,13 +56,6 @@ uint16_t idac_io_get_api_version(void);
 
 HRESULT idac_io_init(void);
 
-/* Send any queued outputs (of which there are currently none, though this may
-   change in subsequent API versions) and retrieve any new inputs.
-
-   Minimum API version: 0x0100 */
-
-HRESULT idac_io_poll(void);
-
 /* Get the state of the cabinet's operator buttons as of the last poll. See
    IDAC_IO_OPBTN enum above: this contains bit mask definitions for button
    states returned in *opbtn. All buttons are active-high.
@@ -93,7 +86,7 @@ void idac_io_get_analogs(struct idac_io_analog_state *out);
 /* Poll the current position of the six-speed shifter and return it via the
    gear out parameter. Valid values are 0 for neutral and 1-6 for gears 1-6.
 
-   idzhook internally translates this gear position value into the correct
+   idachook internally translates this gear position value into the correct
    combination of Gear Left, Gear Right, Gear Up, Gear Down buttons that the
    game will then interpret as the current position of the gear lever.
 

idzio/config.c

@@ -121,9 +121,10 @@ void idz_io_config_load(struct idz_io_config *cfg, const wchar_t *filename)
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", '1', filename);
+    /* Technically it's io4 */
-    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", '2', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io3", L"test", VK_F1, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", '3', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io3", L"service", VK_F2, filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io3", L"coin", VK_F3, filename);
     cfg->restrict_ = GetPrivateProfileIntW(L"io3", L"restrict", 97, filename);
 
     GetPrivateProfileStringW(

mai2hook/config.c

@@ -37,5 +37,6 @@ void mai2_hook_config_load(
     aime_config_load(&cfg->aime, filename);
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
+    vfd_config_load(&cfg->vfd, filename);
     mai2_dll_config_load(&cfg->dll, filename);
 }

mai2hook/config.h

@@ -15,6 +15,7 @@ struct mai2_hook_config {
     struct aime_config aime;
     struct dvd_config dvd;
     struct io4_config io4;
+    struct vfd_config vfd;
     struct mai2_dll_config dll;
 };
 

mai2hook/dllmain.c

@@ -57,7 +57,7 @@ static DWORD CALLBACK mai2_pre_startup(void)
         goto fail;
     }
 
-    hr = vfd_hook_init(2);
+    hr = vfd_hook_init(&mai2_hook_cfg.vfd, 2);
 
     if (FAILED(hr)) {
         goto fail;

mai2io/config.c

@@ -24,9 +24,9 @@ void mai2_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
 
     for (i = 0 ; i < 9 ; i++) {
         swprintf_s(key, _countof(key), L"1p_btn%i", i + 1);

mercuryhook/config.c

@@ -68,6 +68,7 @@ void mercury_hook_config_load(
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
     gfx_config_load(&cfg->gfx, filename);
+    vfd_config_load(&cfg->vfd, filename);
     mercury_dll_config_load(&cfg->dll, filename);
     touch_config_load(&cfg->touch, filename);
     elisabeth_config_load(&cfg->elisabeth, filename);

mercuryhook/config.h

@@ -19,6 +19,7 @@ struct mercury_hook_config {
     struct dvd_config dvd;
     struct io4_config io4;
     struct gfx_config gfx;
+    struct vfd_config vfd;
     struct mercury_dll_config dll;
     struct touch_config touch;
     struct elisabeth_config elisabeth;

mercuryhook/dllmain.c

@@ -64,7 +64,7 @@ static DWORD CALLBACK mercury_pre_startup(void)
         goto fail;
     }
 
-    hr = vfd_hook_init(2);
+    hr = vfd_hook_init(&mercury_hook_cfg.vfd, 2);
 
     if (FAILED(hr)) {
         goto fail;

mercuryio/config.c

@@ -27,11 +27,11 @@ void mercury_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", 0x2D, filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", 0x2E, filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", 0x24, filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
-    cfg->vk_vol_up = GetPrivateProfileIntW(L"io4", L"volup", 0x26, filename);
+    cfg->vk_vol_up = GetPrivateProfileIntW(L"io4", L"volup", VK_UP, filename);
-    cfg->vk_vol_down = GetPrivateProfileIntW(L"io4", L"voldown", 0x28, filename);
+    cfg->vk_vol_down = GetPrivateProfileIntW(L"io4", L"voldown", VK_DOWN, filename);
 
     for (i = 0 ; i < 240 ; i++) {
         swprintf_s(key, _countof(key), L"cell%i", i + 1);

mu3hook/config.c

@@ -40,5 +40,6 @@ void mu3_hook_config_load(
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
     gfx_config_load(&cfg->gfx, filename);
+    vfd_config_load(&cfg->vfd, filename);
     mu3_dll_config_load(&cfg->dll, filename);
 }

mu3hook/config.h

@@ -20,6 +20,7 @@ struct mu3_hook_config {
     struct io4_config io4;
     struct gfx_config gfx;
     // struct led15093_config led15093;
+    struct vfd_config vfd;
     struct mu3_dll_config dll;
 };
 

mu3hook/dllmain.c

@@ -76,7 +76,7 @@ static DWORD CALLBACK mu3_pre_startup(void)
         goto fail;
     }
 
-    hr = vfd_hook_init(2);
+    hr = vfd_hook_init(&mu3_hook_cfg.vfd, 2);
 
     if (FAILED(hr)) {
         goto fail;

mu3io/config.c

@@ -14,9 +14,9 @@ void mu3_io_config_load(
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
 
     cfg->use_mouse = GetPrivateProfileIntW(L"io4", L"mouse", 0, filename);
 

platform/netenv.c

@@ -1,5 +1,4 @@
 #include <windows.h>
-#include <wincrypt.h>
 #include <iphlpapi.h>
 
 #include <stddef.h>
@@ -372,9 +371,12 @@ static uint32_t WINAPI hook_GetBestRoute(
         return ERROR_INVALID_PARAMETER;
     }
 
-    dprintf("Netenv: GetBestRoute ip4 %x -> ip4 %x\n",
+    uint32_t src_addr = _byteswap_ulong(src_ip);
-            (int) _byteswap_ulong(src_ip),
+    uint32_t dest_addr = _byteswap_ulong(dest_ip);
-            (int) _byteswap_ulong(dest_ip));
+
+    dprintf("Netenv: GetBestRoute ip4 %u.%u.%u.%u -> ip4 %u.%u.%u.%u\n",
+            (src_addr >> 24) & 0xff, (src_addr >> 16) & 0xff, (src_addr >> 8) & 0xff, src_addr & 0xff,
+            (dest_addr >> 24) & 0xff, (dest_addr >> 16) & 0xff, (dest_addr >> 8) & 0xff, dest_addr & 0xff);
 
     memset(route, 0, sizeof(*route));
 
@@ -469,8 +471,10 @@ static uint32_t WINAPI hook_IcmpSendEcho2(
         return 0;
     }
 
-    dprintf("Netenv: Virtualized ICMP Ping to ip4 %x\n",
+    uint32_t addr = _byteswap_ulong(DestinationAddress);
-            (int) _byteswap_ulong(DestinationAddress));
+
+    dprintf("Netenv: Virtualized ICMP Ping to ip4 %u.%u.%u.%u\n",
+            (addr >> 24) & 0xff, (addr >> 16) & 0xff, (addr >> 8) & 0xff, addr & 0xff);
 
     pong = (ICMP_ECHO_REPLY *) ReplyBuffer;
     memset(pong, 0, sizeof(*pong));

platform/vfs.c

@@ -466,10 +466,10 @@ static HRESULT vfs_path_hook_option(
 
 static HRESULT vfs_reg_read_amfs(void *bytes, uint32_t *nbytes)
 {
-    return reg_hook_read_wstr(bytes, nbytes, vfs_config.amfs); // seems to be busted?
+    return reg_hook_read_wstr(bytes, nbytes, L"E:\\");
 }
 
 static HRESULT vfs_reg_read_appdata(void *bytes, uint32_t *nbytes)
 {
-    return reg_hook_read_wstr(bytes, nbytes, vfs_config.appdata);
+    return reg_hook_read_wstr(bytes, nbytes, L"Y:\\");
 }

segatools.md

@@ -283,7 +283,7 @@ Enable keychip emulation. Disable to use a real keychip.
 Default: `A69E-01A88888888`
 
 Keychip serial number. Keychip serials observed in the wild follow this
-pattern: `A6xE-01Ayyyyyyyy`.
+pattern: `A\d{2}(E01|X20)[ABCDU]\d{8}`.
 
 ### `gameId`
 

swdchook/config.c

@@ -42,6 +42,7 @@ void swdc_hook_config_load(
     zinput_config_load(&cfg->zinput, filename);
     dvd_config_load(&cfg->dvd, filename);
     io4_config_load(&cfg->io4, filename);
+    vfd_config_load(&cfg->vfd, filename);
 }
 
 void zinput_config_load(struct zinput_config *cfg, const wchar_t *filename)

swdchook/config.h

@@ -17,6 +17,7 @@ struct swdc_hook_config {
     struct aime_config aime;
     struct dvd_config dvd;
     struct io4_config io4;
+    struct vfd_config vfd;
     struct swdc_dll_config dll;
     struct zinput_config zinput;
 };

swdchook/dllmain.c

@@ -16,7 +16,6 @@
 #include "swdchook/config.h"
 #include "swdchook/swdc-dll.h"
 #include "swdchook/io4.h"
-#include "swdchook/zinput.h"
 
 #include "platform/platform.h"
 
@@ -39,7 +38,6 @@ static DWORD CALLBACK swdc_pre_startup(void)
     /* Hook Win32 APIs */
 
     serial_hook_init();
-    zinput_hook_init(&swdc_hook_cfg.zinput, swdc_hook_mod);
     dvd_hook_init(&swdc_hook_cfg.dvd, swdc_hook_mod);
 
     /* Initialize emulation hooks */
@@ -54,30 +52,34 @@ static DWORD CALLBACK swdc_pre_startup(void)
         goto fail;
     }
 
+    hr = swdc_dll_init(&swdc_hook_cfg.dll, swdc_hook_mod);
+
+    if (FAILED(hr)) {
+        goto fail;
+    }
+
     hr = sg_reader_hook_init(&swdc_hook_cfg.aime, 3, 3, swdc_hook_mod);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
-    hr = vfd_hook_init(4);
+    hr = vfd_hook_init(&swdc_hook_cfg.vfd, 4);
 
     if (FAILED(hr)) {
         return hr;
     }
 
-    hr = swdc_dll_init(&swdc_hook_cfg.dll, swdc_hook_mod);
-
-    if (FAILED(hr)) {
-        goto fail;
-    }
-
     hr = swdc_io4_hook_init(&swdc_hook_cfg.io4);
 
     if (FAILED(hr)) {
         goto fail;
     }
 
+    /* Hook external DLL APIs */
+
+    zinput_hook_init(&swdc_hook_cfg.zinput);
+
     /* Initialize debug helpers */
 
     spike_hook_init(L".\\segatools.ini");

swdchook/io4.c

@@ -6,9 +6,13 @@
 
 #include "board/io4.h"
 
+#include "util/dprintf.h"
+
 #include "swdchook/swdc-dll.h"
 
-#include "util/dprintf.h"
+static HANDLE mmf;
+static HRESULT init_mmf(void);
+static void swdc_set_gamebtns(uint16_t value);
 
 static HRESULT swdc_io4_poll(void *ctx, struct io4_state *state);
 static uint16_t coins;
@@ -17,8 +21,7 @@ static const struct io4_ops swdc_io4_ops = {
     .poll = swdc_io4_poll,
 };
 
-HRESULT swdc_io4_hook_init(const struct io4_config *cfg)
+HRESULT swdc_io4_hook_init(const struct io4_config *cfg) {
-{
     HRESULT hr;
 
     assert(swdc_dll.init != NULL);
@@ -29,30 +32,54 @@ HRESULT swdc_io4_hook_init(const struct io4_config *cfg)
         return hr;
     }
 
+    hr = init_mmf();
+
+    if (FAILED(hr)) {
+        return hr;
+    }
+
     return swdc_dll.init();
 }
 
-static HRESULT swdc_io4_poll(void *ctx, struct io4_state *state)
+// Function to initialize the memory-mapped file
-{
+static HRESULT init_mmf(void) {
+    mmf = CreateFileMappingA(INVALID_HANDLE_VALUE, NULL, PAGE_READWRITE, 0, 2, "SWDCButton");
+    if (mmf == NULL) {
+        return S_FALSE;
+    }
+
+    swdc_set_gamebtns(0);
+
+    return S_OK;
+}
+
+void swdc_set_gamebtns(uint16_t value) {
+    // WaitForSingleObject(mutex, INFINITE);
+
+    // Update the memory-mapped file
+    LPVOID mmf_view = MapViewOfFile(mmf, FILE_MAP_ALL_ACCESS, 0, 0, 2);
+    if (mmf_view != NULL) {
+        uint16_t* ptr = (uint16_t*)mmf_view;
+        *ptr = value;
+
+        UnmapViewOfFile(mmf_view);
+    }
+
+    // ReleaseMutex(mutex);
+}
+
+static HRESULT swdc_io4_poll(void *ctx, struct io4_state *state) {
     uint8_t opbtn;
     uint16_t gamebtn;
     struct swdc_io_analog_state analog_state;
     HRESULT hr;
 
-    assert(swdc_dll.poll != NULL);
     assert(swdc_dll.get_opbtns != NULL);
     assert(swdc_dll.get_gamebtns != NULL);
     assert(swdc_dll.get_analogs != NULL);
 
     memset(state, 0, sizeof(*state));
     memset(&analog_state, 0, sizeof(analog_state));
-
-    hr = swdc_dll.poll();
-
-    if (FAILED(hr)) {
-        return hr;
-    }
-
     opbtn = 0;
     gamebtn = 0;
 
@@ -99,7 +126,17 @@ static HRESULT swdc_io4_poll(void *ctx, struct io4_state *state)
         state->buttons[0] |= 1 << 2;
     }
 
-    /* Update steering wheel buttons */
+/* 
+    Update steering wheel buttons
+
+    Those are connected to the SEGA 838-15415 INDICATOR BD MAIN 
+    USB board which is not emulated for now. So those buttons
+    are hooked to the built-in XInput support.
+*/
+
+    /* Instead update gamebtns for the file mapping */
+
+    swdc_set_gamebtns(gamebtn);
 
     if (gamebtn & SWDC_IO_GAMEBTN_STEERING_BLUE) {
         state->buttons[1] |= 1 << 15;

swdchook/swdc-dll.c

@@ -12,9 +12,6 @@ const struct dll_bind_sym swdc_dll_syms[] = {
     {
         .sym = "swdc_io_init",
         .off = offsetof(struct swdc_dll, init),
-    }, {
-        .sym = "swdc_io_poll",
-        .off = offsetof(struct swdc_dll, poll),
     }, {
         .sym = "swdc_io_get_opbtns",
         .off = offsetof(struct swdc_dll, get_opbtns),

swdchook/swdc-dll.h

@@ -7,7 +7,6 @@
 struct swdc_dll {
     uint16_t api_version;
     HRESULT (*init)(void);
-    HRESULT (*poll)(void);
     void (*get_opbtns)(uint8_t *opbtn);
     void (*get_gamebtns)(uint16_t *gamebtn);
     void (*get_analogs)(struct swdc_io_analog_state *out);

swdchook/swdchook.def

@@ -13,7 +13,6 @@ EXPORTS
     amDllVideoSetResolution @3
     swdc_io_get_api_version
     swdc_io_init
-    swdc_io_poll
     swdc_io_get_opbtns
     swdc_io_get_gamebtns
     swdc_io_get_analogs

swdchook/zinput.c

@@ -1,31 +1,61 @@
 #include <windows.h>
-#include <xinput.h>
+#include <shlwapi.h>
 
 #include <assert.h>
+#include <stdbool.h>
 #include <stdlib.h>
+#include <string.h>
+#include <xinput.h>
+
+#include "board/io4.h"
+
+#include "hook/table.h"
+#include "util/dprintf.h"
+#include "util/lib.h"
 
 #include "swdchook/config.h"
 #include "swdchook/zinput.h"
 
-#include "hook/table.h"
+static struct zinput_config zinput_config;
+static bool zinput_hook_initted;
+static bool zinput_controller_init = false;
 
-#include "util/dprintf.h"
+static HRESULT init_mmf(void);
 
+static HANDLE mmf;
+static uint16_t* swdc_gamebtn;
+
+/* Hooked functions */
 DWORD WINAPI hook_XInputGetState(DWORD dwUserIndex, XINPUT_STATE *pState);
+DWORD WINAPI hook_XInputSetState(DWORD dwUserIndex, XINPUT_VIBRATION *pVibration);
+// Not needed for now?
+DWORD WINAPI hook_XInputGetCapabilities(DWORD dwUserIndex, DWORD dwFlags, XINPUT_CAPABILITIES *pCapabilities);
 
-static const struct hook_symbol zinput_hook_syms[] = {
+// Yup SEGA imports XInput functions via ordinal. FUN!
+static struct hook_symbol zinput_hook_syms[] = {
     {
-        .name   = "XInputGetState",
+        .name       = "XInputGetState",
-        .patch  = hook_XInputGetState,
+        .ordinal    = 0x0002,
-        .link   = NULL
+        .patch      = hook_XInputGetState,
+        .link       = NULL
+    }, {
+        .name       = "XInputSetState",
+        .ordinal    = 0x0003,
+        .patch      = hook_XInputSetState,
+        .link       = NULL
+    }, {
+        // Not needed for now?
+        .name       = "XInputGetCapabilities",
+        .patch      = hook_XInputGetCapabilities,
+        .link       = NULL
     },
 };
 
-static struct zinput_config zinput_config;
+void zinput_hook_init(struct zinput_config *cfg)
-static bool zinput_hook_initted;
-
-void zinput_hook_init(struct zinput_config *cfg, HINSTANCE self)
 {
+    wchar_t *module_path;
+    wchar_t *file_name;
+
     assert(cfg != NULL);
 
     if (!cfg->enable) {
@@ -36,45 +66,149 @@ void zinput_hook_init(struct zinput_config *cfg, HINSTANCE self)
         return;
     }
 
-    memcpy(&zinput_config, cfg, sizeof(*cfg));
+    module_path = module_file_name(NULL);
-    hook_table_apply(
+
-            NULL,
+    if (module_path != NULL) {
-            "XINPUT9_1_0.dll",
+        file_name = PathFindFileNameW(module_path);
-            zinput_hook_syms,
+
-            _countof(zinput_hook_syms));
+        free(module_path);
+        module_path = NULL;
+
+        _wcslwr(file_name);
+
+        if (wcsstr(file_name, L"amdaemon") != NULL) {
+            // dprintf("Executable filename contains 'amdaemon', disabling zinput\n");
+            return;
+        }
+    }
 
     hook_table_apply(
-            NULL,
+        NULL,
-            "XINPUT1_1.dll",
+        "XINPUT1_3.dll",
-            zinput_hook_syms,
+        zinput_hook_syms,
-            _countof(zinput_hook_syms));
+        _countof(zinput_hook_syms));
-
+    
-    hook_table_apply(
+    if (FAILED(init_mmf())) {
-            NULL,
+        return;
-            "XINPUT1_2.dll",
+    }
-            zinput_hook_syms,
-            _countof(zinput_hook_syms));
-
-    hook_table_apply(
-            NULL,
-            "XINPUT1_3.dll",
-            zinput_hook_syms,
-            _countof(zinput_hook_syms));
-
-    hook_table_apply(
-            NULL,
-            "XINPUT1_4.dll",
-            zinput_hook_syms,
-            _countof(zinput_hook_syms));
 
     zinput_hook_initted = true;
 
-    dprintf("ZInput: Blocking built-in XInput support\n");
+    dprintf("ZInput: Hooking built-in XInput support\n");
 }
 
-DWORD WINAPI hook_XInputGetState(DWORD dwUserIndex, XINPUT_STATE *pState)
+bool zinput_connect_controller(bool enable) {
-{
+    zinput_controller_init = enable;
+    dprintf("zinput_connect_controller\n");
+    return true;
+}
+
+static HRESULT init_mmf(void) {
+    // Create or open memory-mapped file
+    mmf = CreateFileMappingA(INVALID_HANDLE_VALUE, NULL, PAGE_READWRITE, 0, 2, "SWDCButton");
+    if (mmf == NULL) {
+        return S_FALSE;
+    }
+    
+    // Map the memory-mapped file
+    swdc_gamebtn = (uint16_t*)MapViewOfFile(mmf, FILE_MAP_ALL_ACCESS, 0, 0, 2);
+
+    return S_OK;
+}
+
+DWORD WINAPI hook_XInputGetCapabilities(DWORD dwUserIndex, DWORD dwFlags, XINPUT_CAPABILITIES *pCapabilities) {
+    // dprintf("ZInput: XInputGetCapabilities hook hit\n");
+
+    if (!zinput_controller_init) {
+        zinput_connect_controller(true);
+    }
+
+    if (dwFlags > XINPUT_FLAG_GAMEPAD) {
+        return ERROR_BAD_ARGUMENTS;
+    }
+
+    if (zinput_controller_init && dwUserIndex == 0) {
+        pCapabilities->Flags = XINPUT_CAPS_VOICE_SUPPORTED;
+        pCapabilities->Type = XINPUT_DEVTYPE_GAMEPAD;
+        pCapabilities->SubType = XINPUT_DEVSUBTYPE_GAMEPAD;
+
+        pCapabilities->Gamepad.wButtons = 0xF3FF;
+
+        pCapabilities->Gamepad.bLeftTrigger = 0xFF;
+        pCapabilities->Gamepad.bRightTrigger = 0xFF;
+
+        pCapabilities->Gamepad.sThumbLX = (SHORT)0xFFC0;
+        pCapabilities->Gamepad.sThumbLY = (SHORT)0xFFC0;
+        pCapabilities->Gamepad.sThumbRX = (SHORT)0xFFC0;
+        pCapabilities->Gamepad.sThumbRY = (SHORT)0xFFC0;
+
+        pCapabilities->Vibration.wLeftMotorSpeed = 0xFF;
+        pCapabilities->Vibration.wRightMotorSpeed = 0xFF;
+
+        return ERROR_SUCCESS;
+    } else {
+        return ERROR_DEVICE_NOT_CONNECTED;
+    }
+}
+
+DWORD WINAPI hook_XInputGetState(DWORD dwUserIndex, XINPUT_STATE *pState) {
     // dprintf("ZInput: XInputGetState hook hit\n");
 
-    return ERROR_SUCCESS;
+    if (!zinput_controller_init) {
+        zinput_connect_controller(true);
+    }
+
+    if (zinput_controller_init && dwUserIndex == 0) {
+        XINPUT_GAMEPAD gamepad_state = {0};
+        gamepad_state.wButtons = 0;
+
+        /* Read filemapping for for the gamebtns */
+
+        if (*swdc_gamebtn & SWDC_IO_GAMEBTN_STEERING_PADDLE_LEFT) {
+            gamepad_state.wButtons |= XINPUT_GAMEPAD_LEFT_SHOULDER;
+        }
+
+        if (*swdc_gamebtn & SWDC_IO_GAMEBTN_STEERING_PADDLE_RIGHT) {
+            gamepad_state.wButtons |= XINPUT_GAMEPAD_RIGHT_SHOULDER;
+        }
+
+        if (*swdc_gamebtn & SWDC_IO_GAMEBTN_STEERING_BLUE) {
+            gamepad_state.wButtons |= XINPUT_GAMEPAD_X;
+        }
+
+        if (*swdc_gamebtn & SWDC_IO_GAMEBTN_STEERING_RED) {
+            gamepad_state.wButtons |= XINPUT_GAMEPAD_B;
+        }
+
+        if (*swdc_gamebtn & SWDC_IO_GAMEBTN_STEERING_GREEN) {
+            gamepad_state.wButtons |= XINPUT_GAMEPAD_A;
+        }
+
+        if (*swdc_gamebtn & SWDC_IO_GAMEBTN_STEERING_YELLOW) {
+            gamepad_state.wButtons |= XINPUT_GAMEPAD_Y;
+        }
+        if (pState->dwPacketNumber == UINT_MAX)
+            pState->dwPacketNumber = 0;
+        else
+            pState->dwPacketNumber++;
+
+        pState->Gamepad = gamepad_state;
+        return ERROR_SUCCESS;
+    } else {
+        return ERROR_DEVICE_NOT_CONNECTED;
+    }
+}
+
+DWORD WINAPI hook_XInputSetState(DWORD dwUserIndex, XINPUT_VIBRATION *pVibration) {
+    // dprintf("ZInput: XInputSetState hook hit\n");
+
+    if (!zinput_controller_init) {
+        zinput_connect_controller(true);
+    }
+
+    if (zinput_controller_init && dwUserIndex == 0) {
+        return ERROR_SUCCESS;
+    } else {
+        return ERROR_DEVICE_NOT_CONNECTED;
+    }
 }

swdchook/zinput.h

@@ -8,4 +8,4 @@ struct zinput_config {
     bool enable;
 };
 
-void zinput_hook_init(struct zinput_config *cfg, HINSTANCE self);
+void zinput_hook_init(struct zinput_config *cfg);

swdcio/config.c

@@ -112,9 +112,9 @@ void swdc_io_config_load(struct swdc_io_config *cfg, const wchar_t *filename)
     assert(cfg != NULL);
     assert(filename != NULL);
 
-    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", '1', filename);
+    cfg->vk_test = GetPrivateProfileIntW(L"io4", L"test", VK_F1, filename);
-    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", '2', filename);
+    cfg->vk_service = GetPrivateProfileIntW(L"io4", L"service", VK_F2, filename);
-    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", '3', filename);
+    cfg->vk_coin = GetPrivateProfileIntW(L"io4", L"coin", VK_F3, filename);
     cfg->restrict_ = GetPrivateProfileIntW(L"io4", L"restrict", 128, filename);
 
     GetPrivateProfileStringW(

swdcio/di.c

@@ -28,9 +28,6 @@ static BOOL CALLBACK swdc_di_enum_callback(
 static BOOL CALLBACK swdc_di_enum_callback_pedals(
         const DIDEVICEINSTANCEW *dev,
         void *ctx);
-static BOOL CALLBACK swdc_di_enum_callback_shifter(
-        const DIDEVICEINSTANCEW *dev,
-        void *ctx);
 static void swdc_di_get_buttons(uint16_t *gamebtn_out);
 static uint8_t swdc_di_decode_pov(DWORD pov);
 static void swdc_di_get_analogs(struct swdc_io_analog_state *out);
@@ -411,7 +408,7 @@ static BOOL CALLBACK swdc_di_enum_callback_pedals(
 static void swdc_di_get_buttons(uint16_t *gamebtn_out)
 {
     union swdc_di_state state;
-    uint8_t gamebtn;
+    uint16_t gamebtn;
     HRESULT hr;
 
     assert(gamebtn_out != NULL);

swdcio/swdcio.def

@@ -2,7 +2,6 @@ LIBRARY swdcio
 
 EXPORTS
     swdc_io_init
-    swdc_io_poll
     swdc_io_get_opbtns
     swdc_io_get_gamebtns
     swdc_io_get_analogs

swdcio/swdcio.h

@@ -55,7 +55,7 @@ struct swdc_io_analog_state {
 uint16_t swdc_io_get_api_version(void);
 
 /* Initialize the IO DLL. This is the second function that will be called on
-   your DLL, after mu3_io_get_api_version.
+   your DLL, after SWDC_io_get_api_version.
 
    All subsequent calls to this API may originate from arbitrary threads.
 
@@ -63,15 +63,8 @@ uint16_t swdc_io_get_api_version(void);
 
 HRESULT swdc_io_init(void);
 
-/* Send any queued outputs (of which there are currently none, though this may
-   change in subsequent API versions) and retrieve any new inputs.
-
-   Minimum API version: 0x0100 */
-
-HRESULT swdc_io_poll(void);
-
 /* Get the state of the cabinet's operator buttons as of the last poll. See
-   MU3_IO_OPBTN enum above: this contains bit mask definitions for button
+   SWDC_IO_OPBTN enum above: this contains bit mask definitions for button
    states returned in *opbtn. All buttons are active-high.
 
    Minimum API version: 0x0100 */
@@ -79,7 +72,7 @@ HRESULT swdc_io_poll(void);
 void swdc_io_get_opbtns(uint8_t *opbtn);
 
 /* Get the state of the cabinet's gameplay buttons as of the last poll. See
-   MU3_IO_GAMEBTN enum above for bit mask definitions. Inputs are split into
+   SWDC_IO_GAMEBTN enum above for bit mask definitions. Inputs are split into
    a left hand side set of inputs and a right hand side set of inputs: the bit
    mappings are the same in both cases.