zaphkito/segatools
1
0
Fork 0
forked from TeamTofuShop/segatools
Code Pull Requests Activity

Add configurable debug logging

Browse Source
This commit is contained in:
Bottersnike
2024-06-20 01:22:01 +01:00
parent b0f307f427
commit 7d3cab256b
18 changed files with 159 additions and 49 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
carolhook/controlbd.c
View File

@ -78,7 +78,7 @@ static HRESULT controlbd_frame_decode(struct controlbd_req_any *req, struct iobu
uint8_t checksum_pos = src->pos - 1;
uint8_t calculated_checksum = 0;
uint8_t checksum = 0;
if (src->pos < 6) {
dprintf("Control Board: Decode Error, request too short (pos is 0x%08X)\n", (int)src->pos);
return SEC_E_BUFFER_TOO_SMALL;
@ -137,7 +137,7 @@ static HRESULT controlbd_handle_irp_locked(struct irp *irp)
for (;;) {
if (controlbd_uart.written.bytes[0] == 0xE0) {
#if 0
#if defined(LOG_CAROL_CONTROL_BD)
dprintf("Control Board: TX Buffer:\n");
dump_iobuf(&controlbd_uart.written);
#endif
@ -147,12 +147,12 @@ static HRESULT controlbd_handle_irp_locked(struct irp *irp)
return hr;
}
hr = controlbd_req_dispatch(&req);
hr = controlbd_req_dispatch(&req);
if (FAILED(hr)) {
dprintf("Control Board: Dispatch Error: 0X%X\n", (int) hr);
return hr;
}
#if 0
#if defined(LOG_CAROL_CONTROL_BD)
dprintf("Control Board: RX Buffer:\n");
dump_iobuf(&controlbd_uart.readable);
#endif
@ -206,7 +206,7 @@ static HRESULT controlbd_req_dispatch(const struct controlbd_req_any *req)
case CONTROLBD_CMD_FIRM_SUM:
return controlbd_req_firmware_checksum();
case CONTROLBD_CMD_TIMEOUT:
case CONTROLBD_CMD_TIMEOUT:
dprintf("Control Board: Acknowledge Timeout\n");
return controlbd_req_ack_any(req->hdr.cmd);
@ -278,7 +278,7 @@ static HRESULT controlbd_req_get_board_info(void)
resp.rev = 0x90;
resp.bfr_size = 0x0001;
resp.ack = 1;
strcpy_s(resp.bd_no, sizeof(resp.bd_no), "15312 ");
strcpy_s(resp.chip_no, sizeof(resp.chip_no), "6699 ");
resp.chip_no[5] = 0xFF;
@ -317,7 +317,7 @@ static HRESULT controlbd_req_polling(const struct controlbd_req_any *req)
resp.unk7 = 3;
resp.unk8 = 1;
resp.unk9 = 1;
resp.btns_pressed = 0; // bit 1 is pen button, bit 2 is dodge
resp.coord_x = 0x0;
resp.coord_y = 0x0;