idac: test

dist/idac/segatools.ini

@@ -0,0 +1,116 @@
+[vfs]
+; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
+amfs=
+; Insert the path to the game Option directory here (contains OPxx directories)
+option=
+; Create an empty directory somewhere and insert the path here.
+; This directory may be shared between multiple SEGA games.
+; NOTE: This has nothing to do with Windows %APPDATA%.
+appdata=
+
+[dns]
+; Insert the hostname or IP address of the server you wish to use here.
+; Note that 127.0.0.1, localhost etc are specifically rejected.
+default=127.0.0.1
+
+[ds]
+; Region code on the emulated AMEX board DS EEPROM.
+; 1: Japan
+; 4: Export (some UI elements in English)
+;
+; NOTE: Changing this setting causes a factory reset.
+region=1
+
+[netenv]
+; Simulate an ideal LAN environment. This may interfere with head-to-head play.
+; SEGA games are somewhat picky about their LAN environment, so leaving this
+; setting enabled is recommended.
+enable=1
+
+[keychip]
+; The /24 LAN subnet that the emulated keychip will tell the game to expect.
+; If you disable netenv then you must set this to your LAN's IP subnet, and
+; that subnet must start with 192.168.
+subnet=192.168.100.0
+
+[gpio]
+; Emulated Nu DIP switch for Distribution Server setting.
+;
+; If multiple machines are present on the same LAN then set this to 1 on
+; exactly one machine and set this to 0 on all others.
+dipsw1=1
+
+[aimeio]
+; To use a custom card reader IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in keyboard input.
+path=
+
+[idzio]
+; To use a custom Initial D Zero IO DLL enter its path here.
+; Leave empty if you want to use Segatools built-in gamepad/wheel input.
+path=
+
+[io3]
+; Input API selection for JVS input emulator.
+; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
+mode=xinput
+; Automatically reset the simulated shifter to Neutral when XInput Start is
+; pressed (e.g. when navigating menus between races).
+autoNeutral=1
+; Use the left thumbstick for steering instead of both on XInput Controllers.
+; Not recommended as it will not give you the precision needed for this game
+singleStickSteering=0
+; Adjust scaling for steering wheel input.
+;
+; This setting scales the steering wheel input so that the maximum positive
+; and minimum negative steering inputs reported in the operator menu's input
+; test screen do not exceed the value below. The maximum possible value is 128,
+; and the value that matches the input range of a real cabinet is 97.
+;
+; NOTE: This is not the same thing as DirectInput steering wheel movement
+; range! Segatools cannot control the maximum angle of your physical steering
+; wheel controller, this setting is vendor-specific and can only be adjusted
+; in the Control Panel.
+restrict=97
+
+[dinput]
+; Name of the DirectInput wheel to use (or any text that occurs in its name)
+; Example: TMX
+;
+; If this is left blank then the first DirectInput device will be used.
+deviceName=
+; Name of the positional shifter to use (or any subset thereof).
+; Leave blank if you do not have a positional shifter; a positional shifter
+; will be simulated using the configured Shift Down and Shift Up buttons
+; in this case.
+;
+; Can be the same device as the wheel.
+;
+; Example: T500
+shifterName=
+; Pedal mappings. Valid axis names are:
+;
+; X, Y, Z, RX, RY, RZ, U, V
+;
+; (U and V are old names for Slider 1 and Slider 2).
+; The examples below are valid for a Thrustmaster TMX.
+brakeAxis=RZ
+accelAxis=Y
+; DirectInput button numbers to map to menu inputs. Note that buttons are
+; numbered from 1; some software numbers buttons from 0.
+start=3
+viewChg=10
+; Button mappings for the simulated six-speed shifter.
+shiftDn=1
+shiftUp=2
+; Button mappings for the positional shifter, if present.
+gear1=1
+gear2=2
+gear3=3
+gear4=4
+gear5=5
+gear6=6
+; Invert the accelerator and or brake axis
+; (Needed when using DirectInput for the Dualshock 4 for example)
+reverseAccelAxis=0
+reverseBrakeAxis=0

dist/idac/start.bat

@@ -0,0 +1,10 @@
+@echo off
+
+pushd %~dp0
+
+start inject.exe -d -k idachook.dll amdaemon.exe -c config_common.json config_jp.json config_seat_1_jp.json config_seat_2_jp.json config_ex.json config_seat_1_ex.json config_seat_2_ex.json
+inject -d -k idachook.dll ../WindowsNoEditor/GameProject/Binaries/Win64/GameProject-Win64-Shipping.exe
+
+echo.
+echo Game processes have terminated
+pause