idz, idac, swdc: fixed restrict config setting

dist/idac/segatools.ini

@@ -87,6 +87,18 @@ coin=0x33
 ; Input API selection for IO4 input emulator.
 ; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
 mode=xinput
+; Adjust scaling for steering wheel input.
+;
+; This setting scales the steering wheel input so that the maximum positive
+; and minimum negative steering inputs reported in the operator menu's input
+; test screen do not exceed the value below. The maximum possible value is 128,
+; and the value that matches the input range of a real cabinet is 128.
+;
+; NOTE: This is not the same thing as DirectInput steering wheel movement
+; range! Segatools cannot control the maximum angle of your physical steering
+; wheel controller, this setting is vendor-specific and can only be adjusted
+; in the Control Panel.
+restrict=128
 
 [xinput]
 ; Left and right thumbsticks are mapped to left and right dpad buttons.
@@ -104,18 +116,6 @@ linearSteering=0
 leftStickDeadzone=7849
 ; The default value for the right stick is 8689, max value is 32767.
 rightStickDeadzone=8689
-; Adjust scaling for steering wheel input.
-;
-; This setting scales the steering wheel input so that the maximum positive
-; and minimum negative steering inputs reported in the operator menu's input
-; test screen do not exceed the value below. The maximum possible value is 128,
-; and the value that matches the input range of a real cabinet is 128.
-;
-; NOTE: This is not the same thing as DirectInput steering wheel movement
-; range! Segatools cannot control the maximum angle of your physical steering
-; wheel controller, this setting is vendor-specific and can only be adjusted
-; in the Control Panel.
-restrict=128
 
 [dinput]
 ; Name of the DirectInput wheel to use (or any text that occurs in its name)

dist/idz/segatools.ini

@@ -87,6 +87,18 @@ coin=0x33
 ; Input API selection for JVS input emulator.
 ; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
 mode=xinput
+; Adjust scaling for steering wheel input.
+;
+; This setting scales the steering wheel input so that the maximum positive
+; and minimum negative steering inputs reported in the operator menu's input
+; test screen do not exceed the value below. The maximum possible value is 128,
+; and the value that matches the input range of a real cabinet is 97.
+;
+; NOTE: This is not the same thing as DirectInput steering wheel movement
+; range! Segatools cannot control the maximum angle of your physical steering
+; wheel controller, this setting is vendor-specific and can only be adjusted
+; in the Control Panel.
+restrict=97
 
 [xinput]
 ; Automatically reset the simulated shifter to Neutral when XInput Start is
@@ -102,18 +114,6 @@ linearSteering=0
 leftStickDeadzone=7849
 ; The default value for the right stick is 8689, max value is 32767.
 rightStickDeadzone=8689
-; Adjust scaling for steering wheel input.
-;
-; This setting scales the steering wheel input so that the maximum positive
-; and minimum negative steering inputs reported in the operator menu's input
-; test screen do not exceed the value below. The maximum possible value is 128,
-; and the value that matches the input range of a real cabinet is 97.
-;
-; NOTE: This is not the same thing as DirectInput steering wheel movement
-; range! Segatools cannot control the maximum angle of your physical steering
-; wheel controller, this setting is vendor-specific and can only be adjusted
-; in the Control Panel.
-restrict=97
 
 [dinput]
 ; Name of the DirectInput wheel to use (or any text that occurs in its name)

dist/swdc/segatools.ini

@@ -63,18 +63,6 @@ coin=0x33
 ; Input API selection for IO4 input emulator.
 ; Set "xinput" to use a gamepad and "dinput" to use a steering wheel.
 mode=xinput
-
-[xinput]
-; Use the left thumbstick for steering instead of both on XInput Controllers.
-; Not recommended as it will not give you the precision needed for this game.
-singleStickSteering=1
-; Use linear steering instead of the default non-linear cubing steering.
-linearSteering=0
-; Configure deadzones for the left and right thumbsticks.
-; The default value for the left stick is 7849, max value is 32767.
-leftStickDeadzone=7849
-; The default value for the right stick is 8689, max value is 32767.
-rightStickDeadzone=8689
 ; Adjust scaling for steering wheel input.
 ;
 ; This setting scales the steering wheel input so that the maximum positive
@@ -88,6 +76,18 @@ rightStickDeadzone=8689
 ; in the Control Panel.
 restrict=128
 
+[xinput]
+; Use the left thumbstick for steering instead of both on XInput Controllers.
+; Not recommended as it will not give you the precision needed for this game.
+singleStickSteering=1
+; Use linear steering instead of the default non-linear cubing steering.
+linearSteering=0
+; Configure deadzones for the left and right thumbsticks.
+; The default value for the left stick is 7849, max value is 32767.
+leftStickDeadzone=7849
+; The default value for the right stick is 8689, max value is 32767.
+rightStickDeadzone=8689
+
 [dinput]
 ; Name of the DirectInput wheel to use (or any text that occurs in its name)
 ; Example: G29