host-aprom/NUC123/StdDriver/inc/timer.h

395 lines
12 KiB
C
Raw Normal View History

2024-06-29 20:17:34 +00:00
/**************************************************************************//**
* @file timer.h
* @version V3.00
* $Revision: 7 $
* $Date: 15/07/02 11:21a $
* @brief NUC123 series Timer driver header file
*
* @note
* SPDX-License-Identifier: Apache-2.0
* Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __TIMER_H__
#define __TIMER_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup TIMER_Driver TIMER Driver
@{
*/
/** @addtogroup TIMER_EXPORTED_CONSTANTS TIMER Exported Constants
@{
*/
#define TIMER_ONESHOT_MODE (0UL << TIMER_TCSR_MODE_Pos) /*!< Timer working in one-shot mode */
#define TIMER_PERIODIC_MODE (1UL << TIMER_TCSR_MODE_Pos) /*!< Timer working in periodic mode */
#define TIMER_TOGGLE_MODE (2UL << TIMER_TCSR_MODE_Pos) /*!< Timer working in toggle-output mode */
#define TIMER_CONTINUOUS_MODE (3UL << TIMER_TCSR_MODE_Pos) /*!< Timer working in continuous counting mode */
#define TIMER_CAPTURE_FREE_COUNTING_MODE (0UL << TIMER_TEXCON_RSTCAPSEL_Pos) /*!< Timer capture event to get timer counter value */
#define TIMER_CAPTURE_COUNTER_RESET_MODE (1UL << TIMER_TEXCON_RSTCAPSEL_Pos) /*!< Timer capture event to reset timer counter */
#define TIMER_CAPTURE_FALLING_EDGE (0UL << TIMER_TEXCON_TEX_EDGE_Pos) /*!< Falling edge trigger timer capture */
#define TIMER_CAPTURE_RISING_EDGE (1UL << TIMER_TEXCON_TEX_EDGE_Pos) /*!< Rising edge trigger timer capture */
#define TIMER_CAPTURE_FALLING_AND_RISING_EDGE (2UL << TIMER_TEXCON_TEX_EDGE_Pos) /*!< Both falling and rising edge trigger timer capture */
#define TIMER_COUNTER_FALLING_EDGE (0UL << TIMER_TEXCON_TX_PHASE_Pos) /*!< Counter increase on falling edge */
#define TIMER_COUNTER_RISING_EDGE (1UL << TIMER_TEXCON_TX_PHASE_Pos) /*!< Counter increase on rising edge */
/*@}*/ /* end of group TIMER_EXPORTED_CONSTANTS */
/** @addtogroup TIMER_EXPORTED_FUNCTIONS TIMER Exported Functions
@{
*/
/**
* @brief Set Timer Compare Value
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
* @param[in] u32Value Timer compare value. Valid values are between 2 to 0xFFFFFF.
*
* @return None
*
* @details This macro is used to set new Timer compared value.
*/
#define TIMER_SET_CMP_VALUE(timer, u32Value) ((timer)->TCMPR = (u32Value))
/**
* @brief Set Timer Prescale Value
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
* @param[in] u32Value Timer prescale value. Valid values are between 0 to 0xFF.
*
* @return None
*
* @details This macro is used to set new Timer prescale value.
* @note Clock input is divided by (prescale + 1) before it is fed into timer.
*/
#define TIMER_SET_PRESCALE_VALUE(timer, u32Value) ((timer)->TCSR = ((timer)->TCSR & ~TIMER_TCSR_PRESCALE_Msk) | (u32Value))
/**
* @brief Check specify Timer Status
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @retval 0 Timer 24-bit up counter is inactive
* @retval 1 Timer 24-bit up counter is active
*
* @details This macro is used to check if specify Timer channel is inactive or active.
*/
#define TIMER_IS_ACTIVE(timer) ((timer)->TCSR & TIMER_TCSR_CACT_Msk ? 1 : 0)
/**
* @brief Start Timer Counting
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to start Timer counting.
*/
static __INLINE void TIMER_Start(TIMER_T *timer)
{
timer->TCSR |= TIMER_TCSR_CEN_Msk;
}
/**
* @brief Stop Timer Counting
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to stop/suspend Timer counting.
*/
static __INLINE void TIMER_Stop(TIMER_T *timer)
{
timer->TCSR &= ~TIMER_TCSR_CEN_Msk;
}
/**
* @brief Enable Timer Interrupt Wakeup Function
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to enable the Timer interrupt wake-up function.
* @note To wake the system from Power-down mode, timer clock source must be ether LXT or LIRC.
*/
static __INLINE void TIMER_EnableWakeup(TIMER_T *timer)
{
timer->TCSR |= TIMER_TCSR_WAKE_EN_Msk;
}
/**
* @brief Disable Timer Wakeup Function
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to disable the Timer interrupt wake-up function.
*/
static __INLINE void TIMER_DisableWakeup(TIMER_T *timer)
{
timer->TCSR &= ~TIMER_TCSR_WAKE_EN_Msk;
}
/**
* @brief Enable Capture Pin De-bounce
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to enable the capture pin detection de-bounce function.
*/
static __INLINE void TIMER_EnableCaptureDebounce(TIMER_T *timer)
{
timer->TEXCON |= TIMER_TEXCON_TEXDB_Msk;
}
/**
* @brief Disable Capture Pin De-bounce
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to disable the capture pin detection de-bounce function.
*/
static __INLINE void TIMER_DisableCaptureDebounce(TIMER_T *timer)
{
timer->TEXCON &= ~TIMER_TEXCON_TEXDB_Msk;
}
/**
* @brief Enable Counter Pin De-bounce
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to enable the counter pin detection de-bounce function.
*/
static __INLINE void TIMER_EnableEventCounterDebounce(TIMER_T *timer)
{
timer->TEXCON |= TIMER_TEXCON_TCDB_Msk;
}
/**
* @brief Disable Counter Pin De-bounce
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to disable the counter pin detection de-bounce function.
*/
static __INLINE void TIMER_DisableEventCounterDebounce(TIMER_T *timer)
{
timer->TEXCON &= ~TIMER_TEXCON_TCDB_Msk;
}
/**
* @brief Enable Timer Time-out Interrupt
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to enable the Timer time-out interrupt function.
*/
static __INLINE void TIMER_EnableInt(TIMER_T *timer)
{
timer->TCSR |= TIMER_TCSR_IE_Msk;
}
/**
* @brief Disable Timer Time-out Interrupt
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to disable the Timer time-out interrupt function.
*/
static __INLINE void TIMER_DisableInt(TIMER_T *timer)
{
timer->TCSR &= ~TIMER_TCSR_IE_Msk;
}
/**
* @brief Enable Capture Interrupt
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to enable the Timer capture trigger interrupt function.
*/
static __INLINE void TIMER_EnableCaptureInt(TIMER_T *timer)
{
timer->TEXCON |= TIMER_TEXCON_TEXIEN_Msk;
}
/**
* @brief Disable Capture Interrupt
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function is used to disable the Timer capture trigger interrupt function.
*/
static __INLINE void TIMER_DisableCaptureInt(TIMER_T *timer)
{
timer->TEXCON &= ~TIMER_TEXCON_TEXIEN_Msk;
}
/**
* @brief Get Timer Time-out Interrupt Flag
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @retval 0 Timer time-out interrupt did not occur
* @retval 1 Timer time-out interrupt occurred
*
* @details This function indicates Timer time-out interrupt occurred or not.
*/
static __INLINE uint32_t TIMER_GetIntFlag(TIMER_T *timer)
{
return (timer->TISR & TIMER_TISR_TIF_Msk ? 1 : 0);
}
/**
* @brief Clear Timer time-out Interrupt Flag
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function clears Timer time-out interrupt flag.
*/
static __INLINE void TIMER_ClearIntFlag(TIMER_T *timer)
{
timer->TISR = TIMER_TISR_TIF_Msk;
}
/**
* @brief Get Timer Capture Interrupt Flag
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @retval 0 Timer capture interrupt did not occur
* @retval 1 Timer capture interrupt occurred
*
* @details This function indicates Timer capture interrupt occurred or not.
*/
static __INLINE uint32_t TIMER_GetCaptureIntFlag(TIMER_T *timer)
{
return timer->TEXISR;
}
/**
* @brief Clear Timer capture Interrupt Flag
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function clears Timer capture interrupt flag.
*/
static __INLINE void TIMER_ClearCaptureIntFlag(TIMER_T *timer)
{
timer->TEXISR = TIMER_TEXISR_TEXIF_Msk;
}
/**
* @brief Get Timer Wakeup Flag
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @retval 0 Timer did not wake up system
* @retval 1 Timer Timer wake up system
*
* @details This function indicates Timer has waked up system or not.
*/
static __INLINE uint32_t TIMER_GetWakeupFlag(TIMER_T *timer)
{
return (timer->TISR & TIMER_TISR_TWF_Msk ? 1 : 0);
}
/**
* @brief Clear Timer Wake-up Flag
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return None
*
* @details This function clears the Timer wake-up system flag.
*/
static __INLINE void TIMER_ClearWakeupFlag(TIMER_T *timer)
{
timer->TISR = TIMER_TISR_TWF_Msk;
}
/**
* @brief Get Capture value
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return Capture Value
*
* @details This function reports the current timer capture data value.
*/
static __INLINE uint32_t TIMER_GetCaptureData(TIMER_T *timer)
{
return timer->TCAP;
}
/**
* @brief Get Counter value
*
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
*
* @return Counter Value
*
* @details This function reports the current 24-bit timer counter value.
*/
static __INLINE uint32_t TIMER_GetCounter(TIMER_T *timer)
{
return timer->TDR;
}
uint32_t TIMER_Open(TIMER_T *timer, uint32_t u32Mode, uint32_t u32Freq);
void TIMER_Close(TIMER_T *timer);
void TIMER_Delay(TIMER_T *timer, uint32_t u32Usec);
void TIMER_EnableCapture(TIMER_T *timer, uint32_t u32CapMode, uint32_t u32Edge);
void TIMER_DisableCapture(TIMER_T *timer);
void TIMER_EnableEventCounter(TIMER_T *timer, uint32_t u32Edge);
void TIMER_DisableEventCounter(TIMER_T *timer);
uint32_t TIMER_GetModuleClock(TIMER_T *timer);
/*@}*/ /* end of group TIMER_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group TIMER_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif //__TIMER_H__
/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/