232 lines
11 KiB
C
232 lines
11 KiB
C
|
/**************************************************************************//**
|
||
|
|
* @file pwm.h
|
||
|
|
* @version V3.00
|
||
|
|
* $Revision: 5 $
|
||
|
|
* $Date: 15/07/02 11:21a $
|
||
|
|
* @brief NUC123 series PWM driver header file
|
||
|
|
*
|
||
|
|
* @note
|
||
|
|
* SPDX-License-Identifier: Apache-2.0
|
||
|
|
* Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved.
|
||
|
|
*****************************************************************************/
|
||
|
|
#ifndef __PWM_H__
|
||
|
|
#define __PWM_H__
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C"
|
||
|
|
{
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup Standard_Driver Standard Driver
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup PWM_Driver PWM Driver
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup PWM_EXPORTED_CONSTANTS PWM Exported Constants
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
#define PWM_CHANNEL_NUM (4) /*!< PWM channel number */
|
||
|
|
#define PWM_CLK_DIV_1 (4UL) /*!< PWM clock divide by 1 */
|
||
|
|
#define PWM_CLK_DIV_2 (0UL) /*!< PWM clock divide by 2 */
|
||
|
|
#define PWM_CLK_DIV_4 (1UL) /*!< PWM clock divide by 4 */
|
||
|
|
#define PWM_CLK_DIV_8 (2UL) /*!< PWM clock divide by 8 */
|
||
|
|
#define PWM_CLK_DIV_16 (3UL) /*!< PWM clock divide by 16 */
|
||
|
|
#define PWM_EDGE_ALIGNED (0UL) /*!< PWM working in edge aligned type */
|
||
|
|
#define PWM_CENTER_ALIGNED (1UL) /*!< PWM working in center aligned type */
|
||
|
|
#define PWM_PERIOD_INT_UNDERFLOW (0) /*!< PWM period interrupt triggered if counter underflow */
|
||
|
|
#define PWM_PERIOD_INT_MATCH_CNR (PWM_PIER_INT01TYPE_Msk) /*!< PWM period interrupt triggered if counter match CNR */
|
||
|
|
#define PWM_CAPTURE_INT_RISING_LATCH (PWM_CCR0_CRL_IE0_Msk) /*!< PWM capture interrupt if channel has rising transition */
|
||
|
|
#define PWM_CAPTURE_INT_FALLING_LATCH (PWM_CCR0_CFL_IE0_Msk) /*!< PWM capture interrupt if channel has falling transition */
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
/* PWM Group channel number constants definitions */
|
||
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
||
|
|
#define PWM_CH0 0x0 /*!< PWM Group A channel 0 */
|
||
|
|
#define PWM_CH1 0x1 /*!< PWM Group A channel 1 */
|
||
|
|
#define PWM_CH2 0x2 /*!< PWM Group A channel 2 */
|
||
|
|
#define PWM_CH3 0x3 /*!< PWM Group A channel 3 */
|
||
|
|
#define PWM_CCR_MASK 0x000F000F /*!< PWM CCR0/CCR2 bit0~3 and bit16~19 mask */
|
||
|
|
|
||
|
|
/*@}*/ /* end of group PWM_EXPORTED_CONSTANTS */
|
||
|
|
|
||
|
|
|
||
|
|
/** @addtogroup PWM_EXPORTED_FUNCTIONS PWM Exported Functions
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enable output inverter of specified channel(s)
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
|
||
|
|
* Bit 0 represents channel 0, bit 1 represents channel 1...
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to enable capture input inverter for specified channel(s).
|
||
|
|
* \hideinitializer
|
||
|
|
*/
|
||
|
|
#define PWM_ENABLE_OUTPUT_INVERTER(pwm, u32ChannelMask) \
|
||
|
|
do{ \
|
||
|
|
int i;\
|
||
|
|
(pwm)->PCR &= ~(PWM_PCR_CH0INV_Msk|PWM_PCR_CH1INV_Msk|PWM_PCR_CH2INV_Msk|PWM_PCR_CH3INV_Msk);\
|
||
|
|
for(i = 0; i < 4; i++) { \
|
||
|
|
if((u32ChannelMask) & (1 << i)) \
|
||
|
|
(pwm)->PCR |= (PWM_PCR_CH0INV_Msk << (PWM_PCR_CH0INV_Pos * (i * 4))); \
|
||
|
|
} \
|
||
|
|
}while(0)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get captured rising data of specified channel
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
||
|
|
* @return The timer counter, 0~0xFFFF
|
||
|
|
* @details This macro is used to get captured rising data for specified channel.
|
||
|
|
*/
|
||
|
|
#define PWM_GET_CAPTURE_RISING_DATA(pwm, u32ChannelNum) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CRLR0)) + (u32ChannelNum) * 8))))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Get captured falling data of specified channel
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
||
|
|
* @return The timer counter, 0~0xFFFF
|
||
|
|
* @details This macro is used to get captured falling data for specified channel.
|
||
|
|
*/
|
||
|
|
#define PWM_GET_CAPTURE_FALLING_DATA(pwm, u32ChannelNum) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CFLR0)) + (u32ChannelNum) * 8))))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the prescaler of the selected channel
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
||
|
|
* @param[in] u32Prescaler Clock prescaler of specified channel. Valid values are between 1 ~ 0xFF
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set timer pre-scale for specified channel.
|
||
|
|
* @note If u32Prescaler = 0, corresponding PWM-timer will be stopped.
|
||
|
|
* @note If u32Prescaler = x (x not equal to 0), it means Clock input is divided by (x + 1) before it is fed to the corresponding PWM counter.
|
||
|
|
*/
|
||
|
|
#define PWM_SET_PRESCALER(pwm, u32ChannelNum, u32Prescaler) \
|
||
|
|
((pwm)->PPR = ((pwm)->PPR & ~(PWM_PPR_CP01_Msk << (((u32ChannelNum) >> 1) * 8))) | ((u32Prescaler) << (((u32ChannelNum) >> 1) * 8)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the divider of the selected channel
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
||
|
|
* @param[in] u32Divider Clock divider of specified channel. Valid values are
|
||
|
|
* - \ref PWM_CLK_DIV_1
|
||
|
|
* - \ref PWM_CLK_DIV_2
|
||
|
|
* - \ref PWM_CLK_DIV_4
|
||
|
|
* - \ref PWM_CLK_DIV_8
|
||
|
|
* - \ref PWM_CLK_DIV_16
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set Timer clock source divider selection for specified channel.
|
||
|
|
*/
|
||
|
|
#define PWM_SET_DIVIDER(pwm, u32ChannelNum, u32Divider) \
|
||
|
|
((pwm)->CSR = ((pwm)->CSR & ~(PWM_CSR_CSR0_Msk << ((u32ChannelNum) * 4))) | ((u32Divider) << ((u32ChannelNum) * 4)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the duty of the selected channel
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
||
|
|
* @param[in] u32CMR Duty of specified channel. Valid values are between 0~0xFFFF
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set PWM Comparator value for specified channel.
|
||
|
|
* @note This new setting will take effect on next PWM period.
|
||
|
|
*/
|
||
|
|
#define PWM_SET_CMR(pwm, u32ChannelNum, u32CMR) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CMR0)) + (u32ChannelNum) * 12))) = (u32CMR))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the period of the selected channel
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
|
||
|
|
* @param[in] u32CNR Period of specified channel. Valid values are between 0~0xFFFF
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set timer loaded value(CNR) for specified channel.\n
|
||
|
|
* Loaded value determines the PWM period.
|
||
|
|
* @note This new setting will take effect on next PWM period.
|
||
|
|
* @note PWM counter will stop if period length set to 0.
|
||
|
|
*/
|
||
|
|
#define PWM_SET_CNR(pwm, u32ChannelNum, u32CNR) (*((__IO uint32_t *) ((((uint32_t)&((pwm)->CNR0)) + (u32ChannelNum) * 12))) = (u32CNR))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Set the PWM aligned type
|
||
|
|
* @param[in] pwm The pointer of the specified PWM module
|
||
|
|
* - PWMA : PWM Group A
|
||
|
|
* @param[in] u32ChannelMask Combination of enabled channels. Each bit corresponds to a channel
|
||
|
|
* Bit 0 represents channel 0, bit 1 represents channel 1...
|
||
|
|
* @param[in] u32AlignedType PWM aligned type, valid values are:
|
||
|
|
* - \ref PWM_EDGE_ALIGNED
|
||
|
|
* - \ref PWM_CENTER_ALIGNED
|
||
|
|
* @return None
|
||
|
|
* @details This macro is used to set the PWM aligned type.
|
||
|
|
* @note PWM trigger ADC function is only supported when PWM operating at Center-aligned type.
|
||
|
|
* \hideinitializer
|
||
|
|
*/
|
||
|
|
#define PWM_SET_ALIGNED_TYPE(pwm, u32ChannelMask, u32AlignedType) \
|
||
|
|
do{ \
|
||
|
|
int i; \
|
||
|
|
for(i = 0; i < 4; i++) { \
|
||
|
|
if((u32ChannelMask) & (1 << i)) \
|
||
|
|
(pwm)->PCR = ((pwm)->PCR & ~(PWM_PCR_PWM01TYPE_Msk << (i >> 1))) | ((u32AlignedType) << (PWM_PCR_PWM01TYPE_Pos + (i >> 1))); \
|
||
|
|
} \
|
||
|
|
}while(0)
|
||
|
|
|
||
|
|
|
||
|
|
uint32_t PWM_ConfigCaptureChannel(PWM_T *pwm,
|
||
|
|
uint32_t u32ChannelNum,
|
||
|
|
uint32_t u32UnitTimeNsec,
|
||
|
|
uint32_t u32CaptureEdge);
|
||
|
|
uint32_t PWM_ConfigOutputChannel(PWM_T *pwm,
|
||
|
|
uint32_t u32ChannelNum,
|
||
|
|
uint32_t u32Frequncy,
|
||
|
|
uint32_t u32DutyCycle);
|
||
|
|
void PWM_Start(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_Stop(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_ForceStop(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_EnableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition);
|
||
|
|
void PWM_DisableADCTrigger(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_ClearADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Condition);
|
||
|
|
uint32_t PWM_GetADCTriggerFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_EnableCapture(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_DisableCapture(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_EnableOutput(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_DisableOutput(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_EnablePDMA(PWM_T *pwm, uint32_t u32ChannelMask, uint32_t u32RisingFirst);
|
||
|
|
void PWM_DisablePDMA(PWM_T *pwm, uint32_t u32ChannelMask);
|
||
|
|
void PWM_EnableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Duration);
|
||
|
|
void PWM_DisableDeadZone(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_EnableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge);
|
||
|
|
void PWM_DisableCaptureInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge);
|
||
|
|
void PWM_ClearCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32Edge);
|
||
|
|
uint32_t PWM_GetCaptureIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_EnableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntDutyType);
|
||
|
|
void PWM_DisableDutyInt(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_ClearDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
uint32_t PWM_GetDutyIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_EnablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum, uint32_t u32IntPeriodType);
|
||
|
|
void PWM_DisablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
void PWM_ClearPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
uint32_t PWM_GetPeriodIntFlag(PWM_T *pwm, uint32_t u32ChannelNum);
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/*@}*/ /* end of group PWM_EXPORTED_FUNCTIONS */
|
||
|
|
|
||
|
|
/*@}*/ /* end of group PWM_Driver */
|
||
|
|
|
||
|
|
/*@}*/ /* end of group Standard_Driver */
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif //__PWM_H__
|
||
|
|
|
||
|
|
/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/
|