{% extends "konami.html" %} {% block title %}Packet format{% endblock %} {% block body %}

Packet format

e-Amusement uses XML for its application layer payloads. This XML is either verbatim, or in a custom packed binary format.

The XML format

Each tag that contains a value has a __type attribute that identifies what type it is. Array types have a __count attribute indicating how many items are in the array. Binary blobs additionally have a __size attribute indicating their length (this is notably not present on strings, however).

It is perhaps simpler to illustrate with an example, so:

{% highlight 'xml' %}


    
        
        
            G_CARDED
            5
            1639669516779
            1
            
            
            1
            
            ea
        
    

{% endhighlight %}

Arrays are encoded by concatenating every value together, with spaces between them. Data types that have multiple values, are serialized similarly.

Therefore, an element storing an array of 3u8 ([(1, 2, 3), (4, 5, 6)]) would look like this

{% highlight 'xml' %}
1 2 3 4 5 6
{% endhighlight %}

Besides this, this is otherwise a rather standard XML.

Packed binary overview

Many packets, rather than using a string-based XML format, use a custom binary packed format instead. While it can be a little confusing, remembering that this is encoding an XML tree can make it easier to parse.

To start with, let's take a look at the overall structure of the packets.

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A0 C E ~E Head length
Schema definition
FF Align
Data length
Payload
Align

Every packet starts with the magic byte 0xA0. Following this is the content byte, the encoding byte, and then the 2's compliment of the encoding byte.

Possible values for the content byte are:

C Content
0x42 Packed names, contains data
0x43 Packed names, schema only
0x45 Full names, contains data
0x46 Full names, schema only
Source code details

Not totally cleaned these up yet, but the general concept of how packets are parsed can be seen fairly clearly. At a high level, we have a single function that validates the header, parses out the schema, then goes to read the body of the packet, if we're expecting it. The arguments to parse_packet_header will make more sense in a moment.

libavs-win32.dll:0x1003483

parse_packet_header has a lot of things going on, so I'm just pulling out a few important snippets here.



libavs-win32.dll:0x1003448c

We first read out four bytes from the start of the packet, and convert that to an integer; nothing especially magic here. The next block however is potentially not the first that you might have expected to see. Based on the two flags passed into the function arguments, we are going to subtract a value from this header. Specifically, the first byte we subtract is always 0xa0, then the second byte are those C value in the table above.

Finally, we mask out the first two bytes, and assert that they're both null. That is, they are exactly equal to the value we subtracted from them. Of note here is that the caller to this function "decides" what sort of packet it is expecting.

We can also see the check for ~E here. If that check passes, we return the E byte, otherwise we're going to error.

The encoding flag indicates the encoding for all string types in the packet (more on those later). Possible values are:

E ~E Encoding name
0x00 0xFF None
0x20 0xDF ASCII
0x40 0xBF ISO-8859-1 ISO_8859-1
0x60 0x9F EUC-JP EUCJP EUC_JP
0x80 0x7F SHIFT-JIS SHIFT_JIS SJIS
0xA0 0x5F UTF-8 UTF8

Data is assumed by default to be in ISO 8859 encoding. That is, for encodings 0x00 and 0x40, no transformation is performed on the binary data to produce readable text.

ASCII encoding is true 7-bit ASCII, with the 8th bit always set to 0. This is validated.

Source code details

The full table for these values can be found in libavs.

libavs-win32.dll:0x1006b960

A second table exists just before this on in the source, responsible for the <?xml version='1.0' encoding='??'?> line in XML files.

libavs-win32.dll:0x1006b940

This is indexed using the following function, which maps the above encoding IDs to 1, 2, 3, 4 and 5 respectively.

{% highlight "c" %}char* xml_get_encoding_name(uint encoding_id) {
    return ENCODING_NAME_TABLE[((encoding_id & 0xe0) >> 5) * 4];
}{% endhighlight %}

While validating ~E isn't technically required, it acts as a useful assertion that the packet being parsed is valid.

The packet schema header

Following the 4 byte header, is a 4 byte integer containing the length of the next part of the header (this is technically made redundant as this structure is also terminated).

This part of the header defines the schema that the main payload uses.

A tag definition follows one of the following three formats:

The encoding of structure names varies depending on the packet content byte. If the content flag indicated we have a full string, we first need to check if the value of the first byte exceeds 0x7f. If it does, we need to read an additional byte. In the single byte case, we subtract 0x3f1 to get our real length. In the two byte case we subtract 0x7fbf2. In the latter case, the maximum allowed length is 0x1000.
1 simplified from (length & ~0x40) + 0x01
2 simplified from (length & ~0x8000) + 0x41

If we are instead parsing packed names, then the names are encoded as densely packed 6 bit values. The length prefix (nlen) determines the length of the final unpacked string. The acceptable alphabet is 0123456789:ABCDEFGHIJKLMNOPQRSTUVWXYZ_abcdefghijklmnopqrstuvwxyz, and the packed values are indecies within this alphabet. The maximum length for a name in this mode is 36 bytes (0x24).

The children can be a combination of either attribute names, or child tags. Attribute names are represented by the byte 0x2E followed by a length prefixed name as defined above. Child tags follow the above format. Type 0x2E must therefore be considered reserved as a possible structure type. As they carry special meaning in text-bsaed XML encoding, attribute names beginning with __ are disallowed.

Source code details

I'm not going to labour this one, so if you want to go look yourself:

Attributes (type 0x2E) represent a string attribute. Any other attribute must be defined as a child tag. Is it notable that 0 children is allowable, which is how the majority of values are encoded.

All valid IDs, and their respective type, are listed in the following table. The bucket column here will be used later when unpacking the main data, so we need not worry about it for now, but be warned it exists and is possibly the least fun part of this format.

ID Bytes C type Bucket XML names ID Bytes C type Bucket XML names
0x01 0 void - void 0x21 24 uint64[3] int 3u64
0x02 1 int8 byte s8 0x22 12 float[3] int 3f
0x03 1 uint8 byte u8 0x23 24 double[3] int 3d
0x04 2 int16 short s16 0x24 4 int8[4] int 4s8
0x05 2 uint16 short u16 0x25 4 uint8[4] int 4u8
0x06 4 int32 int s32 0x26 8 int16[4] int 4s16
0x07 4 uint32 int u32 0x27 8 uint8[4] int 4u16
0x08 8 int64 int s64 0x28 16 int32[4] int 4s32 vs32
0x09 8 uint64 int u64 0x29 16 uint32[4] int 4u32 vs32
0x0a prefix char[] int bin binary 0x2a 32 int64[4] int 4s64
0x0b prefix char[] int str string 0x2b 32 uint64[4] int 4u64
0x0c 4 uint8[4] int ip4 0x2c 16 float[4] int 4f vf
0x0d 4 uint32 int time 0x2d 32 double[4] int 4d
0x0e 4 float int float f 0x2e prefix char[] int attr
0x0f 8 double int double d 0x2f 0 - array
0x10 2 int8[2] short 2s8 0x30 16 int8[16] int vs8
0x11 2 uint8[2] short 2u8 0x31 16 uint8[16] int vu8
0x12 4 int16[2] int 2s16 0x32 16 int8[8] int vs16
0x13 4 uint16[2] int 2u16 0x33 16 uint8[8] int vu16
0x14 8 int32[2] int 2s32 0x34 1 bool byte bool b
0x15 8 uint32[2] int 2u32 0x35 2 bool[2] short 2b
0x16 16 int16[2] int 2s64 vs64 0x36 3 bool[3] int 3b
0x17 16 uint16[2] int 2u64 vu64 0x37 4 bool[4] int 4b
0x18 8 float[2] int 2f 0x38 16 bool[16] int vb
0x19 16 double[2] int 2d vd 0x38
0x1a 3 int8[3] int 3s8 0x39
0x1b 3 uint8[3] int 3u8 0x3a
0x1c 6 int16[3] int 3s16 0x3b
0x1d 6 uint16[3] int 3u16 0x3c
0x1e 12 int32[3] int 3s32 0x3d
0x1f 12 uint32[3] int 3u32 0x3e
0x20 24 int64[3] int 3s64 0x3f

Strings should be encoded and decoded according to the encoding specified in the packet header. Null termination is optional, however should be stripped during decoding.

All of these IDs are & 0x3F. Any value can be turned into an array by setting the 7th bit high (| 0x40). Arrays of this form, in the data section, will be an aligned size: u32 immediately followed by size bytes' worth of (unaligned!) values of the unmasked type. Despite being a u32, the maximum length allowed is 0xffffff.

Source code details

The full table for these values can be found in libavs. This table contains the names of every tag, along with additional information such as how many bytes that data type requires, and which parsing function should be used.

libavs-win32.dll:0x100782a8
Note about the array type:

While I'm not totally sure, I have a suspicion this type is used internally as a pseudo-type. Trying to identify its function as a parsable type has some obvious blockers:

All of the types have convenient printf-using helper functions that are used to emit them when serializing XML. All except one.

If we have a look inside the function that populates node sizes (libavs-win32.dll:0x1000cf00), it has an explicit case, however is the same fallback as the default case.

In the same function, however, we can find a second (technically first) check for the array type.

This seems to suggest that internally arrays are represented as a normal node, with the array type, however when serializing it's converted into the array types we're used to (well, will be after the next sections) by masking 0x40 onto the contained type.

Also of interest from this snippet is the fact that void, bin, str, and attr cannot be arrays. void and attr make sense, however str and bin are more interesting. I suspect this is because konami want to be able to preallocate the memory, which wouldn't be possible with these variable length structures.

The data section

This is where all the actual packet data is. For the most part, parsing this is the easy part. We traverse our schema, and read values out of the packet according to the value indicated in the schema. Unfortunately, konami decided all data should be aligned very specifically, and that gaps left during alignment should be backfilled later. This makes both reading and writing somewhat more complicated, however the system can be fairly easily understood.

Firstly, we divide the payload up into 4 byte chunks. Each chunk can be allocated to either store individual bytes, shorts, or ints (these are the buckets in the table above). When reading or writing a value, we first check if a chunk allocated to the desired type's bucket is available and has free/as-yet-unread space within it. If so, we will store/read our data to/from there. If there is no such chunk, we claim the next unclaimed chunk for our bucket.

For example, imagine we write the sequence byte, int, byte, short, byte, int, short. The final output should look like:

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
byte byte byte int short short int

While this might seem a silly system compared to just not aligning values, it is at least possible to intuit that it helps reduce wasted space. It should be noted that any variable-length structure, such as a string or an array, claims all chunks it encroaches on for the int bucket, disallowing the storage of bytes or shorts within them.

Implementing a packer

While the intuitive way to understand the packing algorithm is via chunks and buckets, a far more efficient implementation can be made that uses three pointers. Rather than try to explain in words, hopefully this python implementation should suffice as explanation:

{% highlight "python" %}class Packer:
    def __init__(self, offset=0):
        self._word_cursor = offset
        self._short_cursor = offset
        self._byte_cursor = offset
        self._boundary = offset % 4

    def _next_block(self):
        self._word_cursor += 4
        return self._word_cursor - 4

    def request_allocation(self, size):
        if size == 0:
            return self._word_cursor
        elif size == 1:
            if self._byte_cursor % 4 == self._boundary:
                self._byte_cursor = self._next_block() + 1
            else:
                self._byte_cursor += 1
            return self._byte_cursor - 1
        elif size == 2:
            if self._short_cursor % 4 == self._boundary:
                self._short_cursor = self._next_block() + 2
            else:
                self._short_cursor += 2
            return self._short_cursor - 2
        else:
            old_cursor = self._word_cursor
            for _ in range(math.ceil(size / 4)):
                self._word_cursor += 4
            return old_cursor

    def notify_skipped(self, no_bytes):
        for _ in range(math.ceil(no_bytes / 4)):
            self.request_allocation(4){% endhighlight %}

{% endblock %}