remove yubideck_v3

use https://gitea.tendokyu.moe/beerpsi/chuniio-yubideck instead
This commit is contained in:
beerpsi 2024-01-02 19:10:01 +07:00
parent bf59f9acb9
commit a1790a9a48
7 changed files with 1 additions and 147 deletions

View File

@ -17,7 +17,6 @@ panic = "abort"
chusan = [] chusan = []
tasoller_v1 = [] tasoller_v1 = []
tasoller_v2 = [] tasoller_v2 = []
yubideck_v3 = []
[dependencies] [dependencies]
anyhow = "1.0.76" anyhow = "1.0.76"

View File

@ -23,7 +23,6 @@ coin=0x33
Currently supported backends are: Currently supported backends are:
- `tasoller_v1` - `tasoller_v1`
- `tasoller_v2` - `tasoller_v2`
- `yubideck_v3`
```shell ```shell
CONTROLLER="tasoller_v1" # replace with your preferred controller backend CONTROLLER="tasoller_v1" # replace with your preferred controller backend

View File

@ -3,7 +3,7 @@
mkdir -p dist/chusan mkdir -p dist/chusan
mkdir -p dist/chuni mkdir -p dist/chuni
for backend in tasoller_v1 tasoller_v2 yubideck_v3 for backend in tasoller_v1 tasoller_v2
do do
cargo build --target i686-pc-windows-msvc --release --features chusan,$backend cargo build --target i686-pc-windows-msvc --release --features chusan,$backend
cargo build --target x86_64-pc-windows-msvc --release --features chusan,$backend cargo build --target x86_64-pc-windows-msvc --release --features chusan,$backend

View File

@ -19,8 +19,6 @@ cfg_if::cfg_if! {
use crate::backends::tasoller_v1 as con_impl; use crate::backends::tasoller_v1 as con_impl;
} else if #[cfg(feature = "tasoller_v2")] { } else if #[cfg(feature = "tasoller_v2")] {
use crate::backends::tasoller_v2 as con_impl; use crate::backends::tasoller_v2 as con_impl;
} else if #[cfg(feature = "yubideck_v3")] {
use crate::backends::yubideck_v3 as con_impl;
} else if #[cfg(feature = "my_controller")] { } else if #[cfg(feature = "my_controller")] {
use crate::backends::my_controller as con_impl; use crate::backends::my_controller as con_impl;
} else { } else {

View File

@ -1,7 +1,6 @@
pub mod dummy; pub mod dummy;
pub mod tasoller_v1; pub mod tasoller_v1;
pub mod tasoller_v2; pub mod tasoller_v2;
pub mod yubideck_v3;
pub enum ReadType { pub enum ReadType {
Bulk, Bulk,

View File

@ -1,139 +0,0 @@
//! # YubiDeck v3
//! USB device: 1973:2001
//!
//! USB interface: 0
//!
//! Note that carding in using the YubiDeck card reader will not
//! work until a compatible `aimeio` implementation is provided.
//!
//! ## Protocol information
//!
//! ### IN Interrupt (0x81)
//! - Content length: 45 bytes
//! - Byte 0: IR data (bit 0 for lowest IR to bit 6 for highest)
//! - Byte 1:
//! - Bit 0: Test
//! - Bit 1: Service
//! - Bit 2: Coin
//! - Bytes 2..34: Touch sensor pressure (starts from top left,
//! top to bottom then left to right)
//! - Byte 34: Card type: (0: no card, 1: MIFARE Classic, 2: FeliCa)
//! - Byte 35..45: Card IDm/access code
//!
//! ### OUT Interrupt (0x02)
//! - Content length: 61 bytes
//! - Byte 0: Packet type
//! - Type 0:
//! - Bytes 1..61: Slider LED (RGB, right -> left, 20 final pixels)
//! - Type 1:
//! - Bytes 1..34: Slider LED (RGB, right -> left, 11 first pixels)
//! - Bytes 34..37: Left air LED (RGB)
//! - Bytes 37..40: Right air LED (RGB)
//! - Bytes 40..43: Card reader LED (RGB)
//! - Bytes 43..61: Padding
#[cfg(any(chuni, chusanapp))]
use anyhow::Result;
#[cfg(any(chuni, chusanapp))]
use rusb::{DeviceHandle, UsbContext};
use super::ReadType;
#[cfg(any(chuni, chusanapp))]
use crate::TIMEOUT;
pub const DEVICE_VID: u16 = 0x1973;
pub const DEVICE_PID: u16 = 0x2001;
pub const READ_TYPE: ReadType = ReadType::Interrupt;
pub const READ_ENDPOINT: u8 = 0x81;
pub const INPUT_MEMORY_SIZE: usize = 45;
pub const OUTPUT_MEMORY_SIZE: usize = 122;
#[cfg(any(chuni, amdaemon))]
#[inline(always)]
pub fn jvs_poll(input: &[u8]) -> (u8, u8) {
(input[1] & 3, input[0])
}
#[cfg(any(chuni, amdaemon))]
#[inline(always)]
pub fn is_coin_button_pressed(input: &[u8]) -> bool {
(input[1] & 4) != 0
}
#[cfg(any(chuni, chusanapp))]
#[inline(always)]
pub fn read_pressure_data(input: &[u8]) -> [u8; 32] {
let mut pressure = [0u8; 32];
for (i, p) in input.iter().skip(2).take(32).enumerate() {
pressure[if i % 2 == 0 { 30 - i } else { 32 - i }] = *p
}
pressure
}
#[cfg(any(chuni, chusanapp))]
#[inline(always)]
pub fn init_output_buffer(output: &mut [u8]) {
output[0] = 0;
output[61] = 1;
}
#[cfg(any(chuni, chusanapp))]
#[inline(always)]
pub fn set_slider_leds<T: UsbContext>(
device: &DeviceHandle<T>,
output: &mut [u8],
rgb: &[u8],
) -> Result<()> {
for (buf_chunk, state_chunk) in output[1..61].chunks_mut(3).zip(rgb.chunks(3).take(20)) {
buf_chunk[0] = state_chunk[0];
buf_chunk[1] = state_chunk[1];
buf_chunk[2] = state_chunk[2];
}
for (buf_chunk, state_chunk) in output[62..95]
.chunks_mut(3)
.zip(rgb.chunks(3).skip(20).take(11))
{
buf_chunk[0] = state_chunk[0];
buf_chunk[1] = state_chunk[1];
buf_chunk[2] = state_chunk[2];
}
device.write_interrupt(0x02, &output[0..61], TIMEOUT)?;
device.write_interrupt(0x02, &output[61..], TIMEOUT)?;
Ok(())
}
#[cfg(any(chuni, chusanapp))]
#[inline(always)]
pub fn set_led_colors<T: UsbContext>(
device: &DeviceHandle<T>,
output: &mut [u8],
board: u8,
rgb: &[u8],
) -> Result<()> {
if board != 0 && board != 1 {
return Ok(());
}
match board {
0 => {
output[95] = rgb[150];
output[96] = rgb[151];
output[97] = rgb[152];
}
1 => {
output[98] = rgb[180];
output[99] = rgb[181];
output[100] = rgb[182];
}
_ => unreachable!(),
}
device.write_interrupt(0x02, &output[61..], TIMEOUT)?;
Ok(())
}

View File

@ -34,8 +34,6 @@ cfg_if::cfg_if! {
use crate::backends::tasoller_v1 as con_impl; use crate::backends::tasoller_v1 as con_impl;
} else if #[cfg(feature = "tasoller_v2")] { } else if #[cfg(feature = "tasoller_v2")] {
use crate::backends::tasoller_v2 as con_impl; use crate::backends::tasoller_v2 as con_impl;
} else if #[cfg(feature = "yubideck_v3")] {
use crate::backends::yubideck_v3 as con_impl;
} else { } else {
use crate::backends::dummy as con_impl; use crate::backends::dummy as con_impl;
} }