Go to file
2022-03-17 23:45:41 +00:00
src Support chusan 2022-03-18 01:45:24 +08:00
.gitignore init 2022-01-23 08:37:10 +08:00
.gitmodules read config 2022-01-27 02:25:17 +08:00
build.zig Support chusan 2022-03-18 01:45:24 +08:00
README.md Update README.md 2022-03-17 23:45:41 +00:00
segatools.ini Support chusan 2022-03-18 01:45:24 +08:00
Tasoller Slider.dsl Add test program 2022-02-05 15:06:08 +08:00

chuniio-tasoller

chuniio driver for tasoller custom 2.0 firmware

Supported titles:

  • Chunithm
  • Chunithm NEW

Downloads avaliable in releases

Configuration

segatools.ini

[chuniio]
;; For Chunithm or Chunithm NEW (segatools_32.ini)
path=chuniio_tasoller.dll
;; For Chunithm NEW (segatools_64.ini)
; path=chuniio_tasoller_x64.dll

;; Uncomment for Chunithm NEW
; chusan=1

[io3]
test=0x31
service=0x32
coin=0x33

USB Protocol

Custom firmware USB device: 1CCF:2333

  • Interface 1
    • Endpoint 4 IN Interrupt (0x84)
      • data len: 36 bytes
      • data[0-2]: {0x68, 0x66, 0x84} (magic?)
      • data[3]
        • bit 0-5: beam 1-6 (1 = blocked)
        • bit 6-7: fn1 & fn2 (1 = pressed)
      • data[4-35]: touch sensor 1-32 pressure
    • Endpoint 3 OUT Bulk (0x03)
      • data len: 240 bytes
      • data[0-2]: {0x42, 0x4C, 0x00} (magic?)
      • data[3-95]: Slider LED (GRB order, right->left)
      • data[96-167]: Left LED (GRB order top->bottom)
      • data[168-239]: Right LED (GRB order bottom->top)

Build

$ git clone ...
$ git submodule update --init
$ zig build -Drelease-fast=true
$ ls zig-out/lib/chuniio_tasoller.dll