## chuniio-tasoller *with air tower LEDs*

chuniio driver for tasoller custom 2.0 firmware
now with working air tower LEDs when using [Dniel97 segatools](https://gitea.tendokyu.moe/Dniel97/segatools/src/branch/chuniio)  
this currently only works with the chuniio branch of segatools, but may work on the main branch in the future

thanks to:
- [**akiroz**](https://dev.s-ul.net/akiroz/chuniio-tasoller) for the original code and USB Protocol information
- [**Dniel97**](https://gitea.tendokyu.moe/Dniel97) for rewritting my failed attempts at making this work


the current implementation may not be fully arcade accurate, but should be visually acceptable during gameplay  
this should hopefully be addressed in the future


Supported titles:
- Chunithm
- Chunithm NEW
- Chunithm NEW PLUS
- Chunithm SUN
- Chunithm SUN PLUS


## Configuration

segatools.ini
```ini
[chuniio]
;; For Chunithm
;path=chuniio_tasoller.dll
;; For Chunithm NEW or newer
path32=chuniio_tasoller.dll
path64=chuniio_tasoller_x64.dll

;; Uncomment for Chunithm NEW or newer
chusan=1

[io3]
test=0x31
service=0x32
coin=0x33
```

## USB Protocol

Custom firmware USB device: 1CCF:2333
- Interface 1
    - Endpoint 4 IN Interrupt (0x84)
        - data len: 36 bytes
        - data[0-2]: {0x68, 0x66, 0x84} (magic?)
        - data[3]
            - bit 0-5: beam 1-6 (1 = blocked)
            - bit 6-7: fn1 & fn2 (1 = pressed)
        - data[4-35]: touch sensor 1-32 pressure
    - Endpoint 3 OUT Bulk (0x03)
        - data len: 240 bytes
        - data[0-2]: {0x42, 0x4C, 0x00} (magic?)
        - data[3-95]: Slider LED (GRB order, right->left)
        - data[96-167]: Left LED (GRB order top->bottom)
        - data[168-239]: Right LED (GRB order bottom->top)

### Build

```
$ git clone ...
$ git submodule update --init
$ zig build -Drelease-safe=true
$ ls zig-out/lib/chuniio_tasoller.dll
```