; -----------------------------------------------------------------------------
; Path settings
; -----------------------------------------------------------------------------

[vfs]
; Insert the path to the game AMFS directory here (contains ICF1 and ICF2)
amfs=
; Insert the path to the game Option directory here (contains Axxx directories)
option=
; Create an empty directory somewhere and insert the path here.
; This directory may be shared between multiple SEGA games.
; NOTE: This has nothing to do with Windows %APPDATA%.
appdata=

; -----------------------------------------------------------------------------
; Device settings
; -----------------------------------------------------------------------------

[aime]
; Enable Aime card reader assembly emulation. Disable to use a real SEGA Aime
; reader.
enable=1
aimePath=DEVICE\aime.txt

[vfd]
; Enable VFD emulation (currently just stubbed). Disable to use a real VFD
; GP1232A02A FUTABA assembly.
enable=1

; -----------------------------------------------------------------------------
; Network settings
; -----------------------------------------------------------------------------

[dns]
; Insert the hostname or IP address of the server you wish to use here.
; Note that 127.0.0.1, localhost etc are specifically rejected.
default=127.0.0.1

[netenv]
; Simulate an ideal LAN environment. This may interfere with head-to-head play.
; SEGA games are somewhat picky about their LAN environment, so leaving this
; setting enabled is recommended.
enable=1

; -----------------------------------------------------------------------------
; Board settings
; -----------------------------------------------------------------------------

[keychip]
; The /24 LAN subnet that the emulated keychip will tell the game to expect.
; If you disable netenv then you must set this to your LAN's IP subnet, and
; that subnet must start with 192.168.
subnet=192.168.162.0

[system]
; Enable ALLS system settings.
enable=1

; Enable freeplay mode. This will disable the coin slot and set the game to
; freeplay. Keep in mind that some game modes (e.g. Freedom/Time Modes) will not
; allow you to start a game in freeplay mode.
freeplay=0

; LAN Install: If multiple machines are present on the same LAN then set 
; this to 1 on exactly one machine and set this to 0 on all others.
dipsw1=1

; -----------------------------------------------------------------------------
; Misc. hook settings
; -----------------------------------------------------------------------------

[gfx]
enable=1

[unity]
; Enable Unity hook. This will allow you to run custom .NET code before the game
enable=1

; Path to a .NET DLL that should run before the game. Useful for loading
; modding frameworks such as BepInEx.
targetAssembly=

; -----------------------------------------------------------------------------
; LED settings
; -----------------------------------------------------------------------------

[led15093]
; Enable emulation of the 15093-06 controlled lights, which handle the air tower 
; RGBs and the rear LED panel (billboard) on the cabinet.
enable=1

[led]
; Output billboard LED strip data to a named pipe called "\\.\pipe\ongeki_led"
cabLedOutputPipe=1
; Output billboard LED strip data to serial
cabLedOutputSerial=0

; Output slider LED data to the named pipe
controllerLedOutputPipe=1
; Output slider LED data to the serial port
controllerLedOutputSerial=0

; Serial port to send data to if using serial output. Default is COM5.
;serialPort=COM5
; Baud rate for serial data
;serialBaud=921600

; Data output a sequence of bytes, with JVS-like framing.
; Each "packet" starts with 0xE0 as a sync. To avoid E0 appearing elsewhere,
; 0xD0 is used as an escape character -- if you receive D0 in the output, ignore
; it and use the next sent byte plus one instead.
;
; After the sync is one byte for the board number that was updated, followed by
; the red, green and blue values for each LED.
;
; Board 0 has 61 LEDs:
;   [0]-[1]: left side button
;   [2]-[8]: left pillar lower LEDs
;   [9]-[17]: left pillar center LEDs
;   [18]-[24]: left pillar upper LEDs
;   [25]-[35]: billboard LEDs
;   [36]-[42]: right pillar upper LEDs
;   [43]-[51]: right pillar center LEDs
;   [52]-[58]: right pillar lower LEDs
;   [59]-[60]: right side button
;
; Board 1 has 6 LEDs:
;   [0]-[5]: 3 left and 3 right controller buttons
;

; -----------------------------------------------------------------------------
; Custom IO settings
; -----------------------------------------------------------------------------

[aimeio]
; To use a custom card reader IO DLL enter its path here.
; Leave empty if you want to use Segatools built-in keyboard input.
path=

[mu3io]
; To use a custom O.N.G.E.K.I. IO DLL enter its path here.
; Leave empty if you want to use Segatools built-in keyboard/gamepad input.
path=

; -----------------------------------------------------------------------------
; Input settings
; -----------------------------------------------------------------------------

; Keyboard bindings are specified as hexadecimal (prefixed with 0x) or decimal
; (not prefixed with 0x) virtual-key codes, a list of which can be found here:
;
; https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
;
; This is, admittedly, not the most user-friendly configuration method in the
; world. An improved solution will be provided later.

[io4]
; Test button virtual-key code. Default is the F1 key.
test=0x70
; Service button virtual-key code. Default is the F2 key.
service=0x71
; Keyboard button to increment coin counter. Default is the F3 key.
coin=0x72

; Set "1" to enable mouse lever emulation, "0" to use XInput
mouse=1

; XInput input bindings
;
; Left Stick        Lever
; Left Trigger      Lever (move to the left)
; Right Trigger     Lever (move to the right)
; Left              Left red button
; Up                Left green button
; Right             Left blue button
; Left Shoulder     Left side button
; Right Shoulder    Right side button
; X                 Right red button
; Y                 Right green button
; A                 Right blue button
; Back              Left menu button
; Start             Right menu button

; Keyboard input bindings
left1=0x41  ; A
left2=0x53  ; S
left3=0x44  ; D

leftSide=0x01   ; Mouse Left
rightSide=0x02  ; Mouse Right

right1=0x4A ; J
right2=0x4B ; K
right3=0x4C ; L

leftMenu=0x55   ; U
rightMenu=0x4F  ; O