LED board improvements and cleanup

dist/chusan/segatools.ini

@@ -44,7 +44,7 @@ enable=1
 ; LAN Install: If multiple machines are present on the same LAN then set 
 ; this to 1 on exactly one machine and set this to 0 on all others.
 dipsw1=1
-; Monitor type: 0 = 120FPS, 1 = 60FPS
+; Monitor type: 0 = 120FPS (SP), 1 = 60FPS (CVT)
 dipsw2=1
 ; Aime reader hardware type: 0 = SP, 1 = CVT
 dipsw3=1
@@ -57,6 +57,18 @@ framed=1
 ; Select the monitor to run the game on. (Fullscreen only, 0 =primary screen)
 monitor=0
 
+[led15093]
+; 837-15093-06 LED strip emulation setting.
+enable=1
+; Set to 1 if running game in 60FPS (CVT) mode.
+cvtPort=0
+
+[chuniio]
+; Uncomment this if you have custom chuniio implementation.
+; x86 chuniio to path32, x64 to path64. Both are necessary.
+;path32=
+;path64=
+
 ; -----------------------------------------------------------------------------
 ; Input settings
 ; -----------------------------------------------------------------------------
@@ -79,18 +91,12 @@ coin=0x33
 ; Set to 0 for enable separate ir control. Deafult is space key.
 ir=0x20
 
-[io4]
-enable=1
-
-[ledstrip]
-; Set to 1 if running game in CVT mode.
-cvt_port=0
-
-[chuniio]
-; Uncomment this if you have custom chuniio implementation.
-; x86 chuniio to path32, x64 to path64. Both are necessary.
-;path32=
-;path64=
+[ir]
+; Uncomment and complete the following sequence of settings to configure a
+; custom ir-cappable controller if you have one.
+;ir6=0x53
+; ... etc ...
+;ir1=0x53
 
 [slider]
 ; Enable slider emulation. If you have real AC slider, set this to 0.
@@ -116,10 +122,3 @@ cvt_port=0
 ; Enable slider LED serial output. This follows OpeNITHM Serial LED Protocol.
 ; eg. COM5
 ;ledport=
-
-[ir]
-; Uncomment and complete the following sequence of settings to configure a
-; custom ir-cappable controller if you have one.
-;ir6=0x53
-; ... etc ...
-;ir1=0x53