167 lines
4.1 KiB
Markdown
167 lines
4.1 KiB
Markdown
|
# Initial D Arcade Stage Zero configuration settings
|
|||
|
|
|
|||
|
|
This file describes configuration settings specific to Initial D Arcade Stage
|
|||
|
|
Zero.
|
|||
|
|
|
|||
|
|
Keyboard binding settings use
|
|||
|
|
[Virtual-Key Codes](https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes).
|
|||
|
|
|
|||
|
|
## `[io3]`
|
|||
|
|
|
|||
|
|
Cabinet specific inputs.
|
|||
|
|
|
|||
|
|
### `test`
|
|||
|
|
|
|||
|
|
Default `0x31` (`1 Key`)
|
|||
|
|
|
|||
|
|
Key-binding for cabinet test button.
|
|||
|
|
|
|||
|
|
### `service`
|
|||
|
|
|
|||
|
|
Default `0x32` (`2 Key`)
|
|||
|
|
|
|||
|
|
Key-binding for cabinet service button.
|
|||
|
|
|
|||
|
|
### `coin`
|
|||
|
|
|
|||
|
|
Default `0x33` (`3 Key`)
|
|||
|
|
|
|||
|
|
Key-binding for cabinet coin switch.
|
|||
|
|
|
|||
|
|
### `mode`
|
|||
|
|
|
|||
|
|
Choose whether you want to use a xinput (Xbox controllers, etc) or a dinput (PS
|
|||
|
|
controllers, most wheels) type controller.
|
|||
|
|
|
|||
|
|
### `restrict`
|
|||
|
|
|
|||
|
|
Default `97`
|
|||
|
|
|
|||
|
|
This setting scales the steering wheel input so that the maximum positive and
|
|||
|
|
minimum negative steering inputs reported in the operator menu's input test
|
|||
|
|
screen do not exceed the value below. The maximum possible value is 128, and the
|
|||
|
|
value that matches the input range of a real cabinet is 97.
|
|||
|
|
|
|||
|
|
NOTE: This is not the same thing as DirectInput steering wheel movement range!
|
|||
|
|
Segatools cannot control the maximum angle of your physical steering wheel
|
|||
|
|
controller, this setting is vendor-specific and can only be adjusted in the
|
|||
|
|
Control Panel.
|
|||
|
|
|
|||
|
|
### `autoNeutral`
|
|||
|
|
|
|||
|
|
Default `1`
|
|||
|
|
|
|||
|
|
Automatically reset the simulated shifter to Neutral when XInput Start is
|
|||
|
|
pressed (e.g. when navigating menus between races).
|
|||
|
|
|
|||
|
|
### `singleStickSteering`
|
|||
|
|
|
|||
|
|
Default `0`
|
|||
|
|
|
|||
|
|
By default if you use a xinput controller, segatools will use both sticks for
|
|||
|
|
steering. While this is recommended for precision, it may be confusing to some
|
|||
|
|
people. Set this to `1` to use a more traditional control scheme where only the
|
|||
|
|
left stick is used to steer.
|
|||
|
|
|
|||
|
|
## `[dinput]`
|
|||
|
|
|
|||
|
|
Configuration for dinput controllers.
|
|||
|
|
|
|||
|
|
### `deviceName`
|
|||
|
|
|
|||
|
|
Default ` `
|
|||
|
|
|
|||
|
|
Name of the DirectInput wheel or controller to use (or any text that occurs in
|
|||
|
|
its name) Example: TMX, Wireless Controller, T300, etc
|
|||
|
|
|
|||
|
|
If this is left blank then the first DirectInput device will be used. If you
|
|||
|
|
don't know the name of your input device, you can find it in the windows
|
|||
|
|
controller panel. The quickest way to access it is to press Win+R, then type in
|
|||
|
|
`joy.cpl` and look at the list it will display.
|
|||
|
|
|
|||
|
|
### `shifterName`
|
|||
|
|
|
|||
|
|
Default ` `
|
|||
|
|
|
|||
|
|
Name of the positional shifter to use (or any subset thereof). Leave blank if
|
|||
|
|
you do not have a positional shifter; a positional shifter will be simulated
|
|||
|
|
using the configured Shift Down and Shift Up buttons in this case. If you don't
|
|||
|
|
know the name of your input device, you can find it in the windows controller
|
|||
|
|
panel. The quickest way to access it is to press Win+R, then type in `joy.cpl`
|
|||
|
|
and look at the list it will display.
|
|||
|
|
|
|||
|
|
### Note on pedal mappings
|
|||
|
|
|
|||
|
|
Pedal mappings. Valid axis names are:
|
|||
|
|
|
|||
|
|
`X, Y, Z, RX, RY, RZ, U, V`
|
|||
|
|
|
|||
|
|
(U and V are old names for Slider 1 and Slider 2). The default values below are
|
|||
|
|
valid for a Thrustmaster TMX.
|
|||
|
|
|
|||
|
|
### `brakeAxis`
|
|||
|
|
|
|||
|
|
Default `RZ`
|
|||
|
|
|
|||
|
|
Which axis to use for the brake pedal.
|
|||
|
|
|
|||
|
|
### `accelAxis`
|
|||
|
|
|
|||
|
|
Default `Y`
|
|||
|
|
|
|||
|
|
Which axis to use for the accelerator pedal.
|
|||
|
|
|
|||
|
|
### Note on button mappings
|
|||
|
|
|
|||
|
|
These are dinput button numbers. Note that buttons are numbered from 1, while
|
|||
|
|
some software numbers buttons from 0. The default windows controller panel
|
|||
|
|
should show the correct ones, if it hasn't been replaced by the controller
|
|||
|
|
driver.
|
|||
|
|
|
|||
|
|
### `start`
|
|||
|
|
|
|||
|
|
Default `2`
|
|||
|
|
|
|||
|
|
Button mapping for the `Start` button.
|
|||
|
|
|
|||
|
|
### `viewChg`
|
|||
|
|
|
|||
|
|
Default `3`
|
|||
|
|
|
|||
|
|
Button mapping for the `View Change` button.
|
|||
|
|
|
|||
|
|
### `shiftDn`
|
|||
|
|
|
|||
|
|
Default `5`
|
|||
|
|
|
|||
|
|
Button mapping for shifting down with the emulated shifter. (If no `shifterName`
|
|||
|
|
was specified)
|
|||
|
|
|
|||
|
|
### `shiftUp`
|
|||
|
|
|
|||
|
|
Default `6`
|
|||
|
|
|
|||
|
|
Button mapping for shifting up with the emulated shifter. (If no `shifterName`
|
|||
|
|
was specified)
|
|||
|
|
|
|||
|
|
### `gear1`, `gear2`, `gear3`, `gear4`, `gear5`, `gear6`
|
|||
|
|
|
|||
|
|
Default `1, 2, 3, 4, 5, 6`
|
|||
|
|
|
|||
|
|
Button mappings for the physical shifter, if one was specified via the
|
|||
|
|
`shifterName` setting.
|
|||
|
|
|
|||
|
|
### `reverseAccelAxis`
|
|||
|
|
|
|||
|
|
Default `0`
|
|||
|
|
|
|||
|
|
Inverts the accelerator axis if set to ‘1’. This is needed for certain
|
|||
|
|
controllers like the DS4 or Dualsense.
|
|||
|
|
|
|||
|
|
### `reverseBrakeAxis`
|
|||
|
|
|
|||
|
|
Default `0`
|
|||
|
|
|
|||
|
|
Inverts the brake axis if set to ‘1’. This is needed for certain controllers
|
|||
|
|
like the DS4 or Dualsense.
|