segatools/board/led15070-cmd.h

82 lines
2.7 KiB
C
Raw Permalink Normal View History

2024-06-23 19:21:57 +00:00
#pragma once
#include "board/led15070-frame.h"
/* Command IDs */
enum {
LED_15070_CMD_RESET = 0x10,
LED_15070_CMD_SET_INPUT = 0x28, // No known use case
LED_15070_CMD_SET_NORMAL_12BIT = 0x30, // TODO
LED_15070_CMD_SET_NORMAL_8BIT = 0x31,
LED_15070_CMD_SET_MULTI_FLASH_8BIT = 0x32,
LED_15070_CMD_SET_MULTI_FADE_8BIT = 0x33,
LED_15070_CMD_SET_PALETTE_7_NORMAL_LED = 0x34, // No known use case
LED_15070_CMD_SET_PALETTE_6_FLASH_LED = 0x35, // No known use case
LED_15070_CMD_SET_15DC_OUT = 0x36, // No known use case
LED_15070_CMD_SET_15GS_OUT = 0x37, // No known use case
LED_15070_CMD_SET_PSC_MAX = 0x38, // No known use case
LED_15070_CMD_SET_FET_OUTPUT = 0x39,
LED_15070_CMD_SET_GS_PALETTE = 0x3A,
LED_15070_CMD_DC_UPDATE = 0x3B,
LED_15070_CMD_GS_UPDATE = 0x3C,
LED_15070_CMD_ROTATE = 0x3E, // No known use case, wtf is this?
LED_15070_CMD_SET_DC_DATA = 0x3F,
LED_15070_CMD_EEPROM_WRITE = 0x7B,
LED_15070_CMD_EEPROM_READ = 0x7C,
LED_15070_CMD_ACK_ON = 0x7D,
LED_15070_CMD_ACK_OFF = 0x7E,
LED_15070_CMD_BOARD_INFO = 0xF0,
LED_15070_CMD_BOARD_STATUS = 0xF1,
LED_15070_CMD_FW_SUM = 0xF2,
LED_15070_CMD_PROTOCOL_VER = 0xF3,
LED_15070_CMD_TO_BOOT_MODE = 0xFD,
LED_15070_CMD_FW_UPDATE = 0xFE,
};
/* Response codes */
enum {
LED_15070_STATUS_OK = 0x01,
LED_15070_STATUS_SUM_ERR = 0x02,
LED_15070_STATUS_PARITY_ERR = 0x03,
LED_15070_STATUS_FRAMING_ERR = 0x04,
LED_15070_STATUS_OVERRUN_ERR = 0x05,
LED_15070_STATUS_BUFFER_OVERFLOW = 0x06,
};
enum {
LED_15070_REPORT_OK = 0x01,
LED_15070_REPORT_WAIT = 0x02,
LED_15070_REPORT_ERR1 = 0x03,
LED_15070_REPORT_ERR2 = 0x04,
};
/* Request data structures */
struct led15070_req_any {
struct led15070_hdr hdr;
uint8_t cmd;
uint8_t payload[256];
};
/* Response data structures */
struct led15070_resp_any {
struct led15070_hdr hdr;
uint8_t status;
uint8_t cmd;
uint8_t report;
uint8_t data[32];
};
struct led15070_resp_board_info {
struct led15070_hdr hdr;
uint8_t status;
uint8_t cmd;
uint8_t report;
char board_num[8];
uint8_t endcode; // Always 0xFF
uint8_t fw_ver;
};