From 6a8b616bc238212a3b6b6a604183798726e2e9a4 Mon Sep 17 00:00:00 2001
From: Tau <tau@nowhere>
Date: Sun, 6 Jun 2021 15:06:26 -0400
Subject: [PATCH] Document mu3io API

---
 mu3io/mu3io.h | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/mu3io/mu3io.h b/mu3io/mu3io.h
index 9a006ca..d46a475 100644
--- a/mu3io/mu3io.h
+++ b/mu3io/mu3io.h
@@ -17,14 +17,68 @@ enum {
     MU3_IO_GAMEBTN_MENU = 0x10,
 };
 
+/* Get the version of the Ongeki IO API that this DLL supports. This
+   function should return a positive 16-bit integer, where the high byte is
+   the major version and the low byte is the minor version (as defined by the
+   Semantic Versioning standard).
+
+   The latest API version as of this writing is 0x0100. */
+
 uint16_t mu3_io_get_api_version(void);
 
+/* Initialize the IO DLL. This is the second function that will be called on
+   your DLL, after mu3_io_get_api_version.
+
+   All subsequent calls to this API may originate from arbitrary threads.
+
+   Minimum API version: 0x0100 */
+
 HRESULT mu3_io_init(void);
 
+/* Send any queued outputs (of which there are currently none, though this may
+   change in subsequent API versions) and retrieve any new inputs.
+
+   Minimum API version: 0x0100 */
+
 HRESULT mu3_io_poll(void);
 
+/* Get the state of the cabinet's operator buttons as of the last poll. See
+   MU3_IO_OPBTN enum above: this contains bit mask definitions for button
+   states returned in *opbtn. All buttons are active-high.
+
+   Minimum API version: 0x0100 */
+
 void mu3_io_get_opbtns(uint8_t *opbtn);
 
+/* Get the state of the cabinet's gameplay buttons as of the last poll. See
+   MU3_IO_GAMEBTN enum above for bit mask definitions. Inputs are split into
+   a left hand side set of inputs and a right hand side set of inputs: the bit
+   mappings are the same in both cases.
+
+   All buttons are active-high, even though some buttons' electrical signals
+   on a real cabinet are active-low.
+
+   Minimum API version: 0x0100 */
+
 void mu3_io_get_gamebtns(uint8_t *left, uint8_t *right);
 
+/* Get the position of the cabinet lever as of the last poll. The center
+   position should be equal to or close to zero.
+
+   The operator will be required to calibrate the lever's range of motion on
+   first power-on, so the lever position reported through this API does not
+   need to perfectly centered or cover every single position value possible,
+   but it should be reasonably close in order to make things easier for the
+   operator.
+
+   The calibration screen displays the leftmost and rightmost position signal
+   returned from the cabinet's ADC encoder as a pair of raw two's complement
+   hexadecimal values. On a real cabinet these leftmost and rightmost
+   positions are somewhere around 0xB000 and 0x5000 respectively (remember
+   that negative values i.e. left positions have a high most-significant bit),
+   although these values can easily vary by +/- 0x1000 across different
+   cabinets.
+
+   Minimum API version: 0x0100 */
+
 void mu3_io_get_lever(int16_t *pos);