Tau
bc2928804c
board/sg-reader.c: Factor out NFC ass'y emu
...
Combine the NFC module emulator with the LED module emulator and
a virtual UART to build a higher-level reusable building block.
2019-02-26 13:49:29 -05:00
Tau
662bfa55ec
aimeio: Factor out emulated reader assembly app logic
2019-02-26 13:49:29 -05:00
Tau
2cbb18604b
board/sg-led.c: Remove error path from update cmd
...
No way to return it to the host application anyway since this
command is unacknowledged.
2019-02-26 13:49:29 -05:00
Tau
8606d17699
board/sg-nfc.c: Pass UID consistently
...
If we receive it from the upper ops layer then we should send it
back as well.
2019-02-26 13:49:29 -05:00
Tau
bbe085b73d
board/slider-cmd.h: Add separate Diva LED cmd
...
The Chunithm slider has sixteen cells and fifteen (I think?)
vertical lines splitting the cells. Diva does not have these lines,
so presumably the LED data format is different. Need to analyze
this further.
2019-02-26 13:49:29 -05:00
Tau
05ccf363d9
board/meson.build: Fix sorting
2019-02-26 13:49:29 -05:00
Tau
8036ff71ec
board: Factor out Chunithm slider
2019-01-26 12:05:37 -05:00
Tau
6416ef6e95
nu/nusec.c: Don't log security pings
2019-01-17 13:59:02 -05:00
Tau
ee011a74d4
Make dprintfs 64-bit clean
2018-12-17 17:34:50 -05:00
Tau
755be05603
board/sg-nfc.c: Use non-hardcoded UID
...
Turns out this does in fact vary between cards, even though its
actual value is unimportant.
2018-12-17 17:34:50 -05:00
Tau
9159be00a2
Add HW,FW notes on NFC assembly
2018-11-28 11:49:55 -05:00
Tau
2c6d48ce27
Add Chunithm Star Plus WinHTTP debug printfs
2018-11-28 11:49:16 -05:00
Tau
25a1898747
Add j_printf spike flavor
2018-11-28 11:49:10 -05:00
Tau
51e4eca7dd
Add MSVC PCH support
2018-11-23 18:25:22 -05:00
Tau
6adb4e7b8b
Make project buildable by MSVC
2018-11-23 18:25:22 -05:00
Tau
359561d762
Fix meson project name
2018-11-23 18:25:21 -05:00
Tau
dc082c77eb
util/clock.c: Use #define constants
...
MSVC doesn't allow chaining of const expressions grumble grumble
(need to use constexpr, which is a. an extremely ugly looking
reserved word and b. exclusive to C++)
2018-11-23 18:25:21 -05:00
Tau
42a79933f1
util/setupapi.c: Fix calling convention syntax
2018-11-23 18:25:21 -05:00
Tau
829ca160be
nu/gpio.c: Fix static assert
2018-11-23 18:25:21 -05:00
Tau
9ec0fbf957
Suppress hook DLL exports
2018-11-23 18:12:36 -05:00
Tau
0cbd950289
Fix non-PCH build
2018-11-23 14:37:42 -05:00
Tau
0bd8be6610
Bump capnhook dependency
2018-11-23 14:37:35 -05:00
Tau
51994d59ff
Combine both clock hooks
...
Turns out the clock skew doesn't really work unless RTC and TZ
changes are blocked as well.
2018-11-23 14:23:16 -05:00
Tau
1725cfb9ac
Add registry keys for Chunithm
...
Will virtualize this stuff eventually but it will do for now.
2018-11-20 20:58:51 -05:00
Tau
55c68c8094
cardhook: Wire up aimeReaderHost hook
...
This is an external AiMe driver process that is only used by
Chunithm AFAIK. The wiring can be easily re-used for other games.
2018-11-20 20:33:17 -05:00
Tau
1630784c3d
board/sg-led.c: Implement RGB LED support
...
Used by AiMe reader, possibly used elsewhere.
2018-11-20 20:33:17 -05:00
Tau
4936fc2bcc
board/sg-nfc.c: Add initial emu for NFC board
...
This board also supports FeliCa and probably some other stuff.
Need to analyze and implement these features later, Mifare card
support only for now.
2018-11-20 20:33:17 -05:00
Tau
0135236209
board/sg-cmd.c: Add "sg" req/resp packets
2018-11-20 20:33:17 -05:00
Tau
b8ffd20877
board/sg-frame.c: Add "sg" framing support
2018-11-20 20:33:17 -05:00
Tau
9f43f9f397
Hoist slider from board into chunihook
...
Diva slider uses the quasi-JVS framing used by all other SEGA
boards, the Chunithm slider is a special case.
2018-11-20 20:33:17 -05:00
Tau
78e7de613f
nu/nusec.c: Implement log ring buffer
2018-11-20 20:33:17 -05:00
Tau
c825959250
minihook: Load spike config
2018-11-20 20:33:17 -05:00
Tau
9c83a38208
util/clock.c: Apply clock skew
...
SEGA games are unplayable between 03:00 and 07:00 local time due
to a network maintenance period that is hard-coded into the games
themselves (no, guest play is not available).
Deal with this by slowing down time to avoid 02:00 (the time when
a warning appears and new credits eventually start being rejected),
then jump forward to sync up with real time when 07:00 hits.
2018-11-20 20:33:17 -05:00
Tau
9614185511
util/spike.c: Use different filenames for each DLL
...
Might want to hook Chunithm and the card reader satellite process
side by side for instance.
2018-11-20 20:33:17 -05:00
Tau
2440be1cbf
board/io3.c: Handle short reads/writes
2018-11-20 20:33:17 -05:00
Tau
5df0994458
util/dump.c: Add ASCII view to dump output
2018-11-20 20:33:17 -05:00
Tau
c1dee321f3
chunihook/dllmain.c: Wire up Chunithm hook DLL
2018-11-20 20:33:17 -05:00
Tau
4564699a42
chunihook/slider.c: Add Chunithm slider emulation
2018-11-20 20:33:17 -05:00
Tau
75e227cc91
chunihook/jvs.c: Add Chunithm cabinet JVS callbacks
2018-11-20 20:33:17 -05:00
Tau
66132effd7
chunihook: Add empty DLL
2018-11-20 20:33:17 -05:00
Tau
e14c5436c2
minihook: Add security override hook
2018-11-20 20:33:17 -05:00
Tau
5a2a2a6bbf
spike: Add Chunithm Star Plus memory addresses
2018-11-20 20:33:17 -05:00
Tau
c560dc7ee2
util/spike.c: Add configurable log "spike" injector
2018-11-20 20:33:17 -05:00
Tau
1eca0648f1
util/gfx.c: Add crude D3D9 window hook
2018-11-20 20:33:17 -05:00
Tau
851ea65609
util/clock.c: Add hook to prevent date/time changes
2018-11-20 20:33:17 -05:00
Tau
acfa53fc5c
board/slider-cmd.h: Add commands for touch slider PCB
2018-11-20 20:33:17 -05:00
Tau
5a7d549434
board/slider-frame.c: Add framing for touch slider PCB
2018-11-20 20:33:17 -05:00
Tau
372868565e
board/io3.c: Add SEGA "Type 3" JVS I/O emulator
2018-11-20 20:33:17 -05:00
Tau
f05348fb9d
board: Add empty static library
2018-11-20 20:33:17 -05:00
Tau
0929beae11
nu/jvs.c: Add emulated JVS controller
2018-11-20 20:33:17 -05:00
